Smart R

smart-r

SMART R

Ventilate, heat, cool, bring the performance of your CMV up to date!

BENEFITS

  • Thermodynamic double flow
  • Free cooling or active cooling if assembled with insulated ducts
  • Adjustment kit for the replaced machine

Application

  • Replacement of old Double-flow ventilation systems

Mise en oeuvre

  • In an insulated plant room
  • Condensation to be predicted
  • Insulated air supply pipes (min. 25mm)
  • Insulated extraction pipes (min. 25mm)
  • Insulated pipes for release / fresh air 25mm or 50mm
  • Electricity: power supply 230V – 50Hz (2.5mm²)
  • Connection: 4 cables 0.5mm² max.

Description

  • Automatic set-up
  • Compact single block without external units
  • White pre-lacquered aluminium finish 20/10
  • Heat and sound insulation
  • Heat pump on exhaust air, built-in
  • Rotary compressor, French
  • Low-consumption fans (EC ERF 2015)
  • Adjustable ventilation output
  • Device pre-loaded with R407C gas
  • Maintenance at the front
  • Adjustment kit

Main equipment replaced by MyDATEC

BRANDS MODELS IMAGES
Aeroplast STH 250
STH 350
STH 500
aeroplast
Nather SF/DF 180
SF/DF 350
nather
De Dietrich RAE 1500
RAE 2300
de-dietrich
Elge MERV 180
MERV 250
MERV 330
elge
Jacray‘s PRR 051
PRR 05A
PRR 053
jacrays
Comela EC 180
EC 325
EC 1250
comela
Aldes Températion
H
aldes

Range

DESIGNATION DESCRIPTION
MyDATEC Smart 200R unit KIT VMC thermodynamic double flow
Adjustment kit for
1.9kW heating
Touch control

Adjustment kit details

  • Hanging kit
  • Bent circuit board
  • Reinforced, soundproof, sealed aluminium duct
  • Fastening collars
  • Special adhesive tape
  • Supplied with the specific connectors suitable for your old machine’s brand

smart-r-kit

 

Options

DESIGNATION
DESCRIPTION
Dual zone bizone Management independent of the living area
and the night area (ideal for houses larger than 160m²)
Cold + smart-r-kit-adaptation Cooling can be performed via the heat pump if the ducts
are insulated
Air supply adjustment kit  smart-r-froid 2 boards to be adjusted on existing extraction and air supply
networks

 

Technical characteristics

Smart 200R
COP (+7°C ext. / -7°C ext.)
with 20°C inside

3,67 / 4,79

Heating power supplied at -7°C ext.
/ 20°C int.

1,9kW

Heating pump standard power absorption
at +7°C ext. / 20°C int.

0,52 kW

EER at 35°C ext. / 27°C int.

2,41

Heating pump cooling power supplied at
35°C ext. / 27°C int.

1,78 kW

Nominal air flow to be considered
for thermal calculations

200 m3/h

Maximum air flow configurable
(200 Pa)

600 m3/h

Average intensity absorbed

2,3A

Maximum power of
additional heaters

2 kW

Power supply

230 V – 50 Hz

Recommended protection

10 A courbe D

Filtering

G4

Refrigerant fluid

R 407 C

Mass of refrigerant fluid

900 g

Unit weight

60 Kg

smart-r-technical
smart-r-technical-2