MAKING OF THE VMC KIT

MyDATEC provides the ready-to-install kit to ensure the complete installation of your HVAC network.

Placed at the heart of the system, the central VMC will be connected with branches of ducts. Thus, it will be able to ensure the extraction of stale air in the wet rooms and the ducts intended for the passage of the new air in the building.

Various accessories complete all these elements to make your
VMC network.

The complete VMC kit ismade and tested by us before delivery.

PREPARATION OF YOUR AIR CONDITIONING KIT IN THE FACTORY

MyDATEC offers you a customized kit adapted to the specificities of your building.

We manufacture parts to the exact dimensions for optimal installation. This accuracy is essential to ensure:

a good integration of the future installation in the building
a good coherence between the elements of the CMV network.

THE COMPONENTS OF THE MyDATEC HVAC NETWORK

MyDATEC designs all the elements that make up your double flow ventilation system.

It thus guarantees the quality of the equipment and their
compliance with the standards of the regulations in force
. MyDATEC’s dual-flow ventilation network is made up of :

The Central VMC equipped with a thermodynamic exchanger. Model Smart V or Smart H
A fresh air intake in the front of the building with a protective grille
- A roof outlet to evacuate the stale air out of the building (possible on the façade)
Distribution boxes
Extraction vents
Extraction units : as well as their fixing sleeve in the plasterboard.
Flexible, resistant, airtight, soundproof and insulated ducts
Clamps and tape for connecting the ducts to the accessories

TEST OF THE COMPONENTS OF THE AIR CONDITIONING KIT

Before MyDATEC sends you the CMV kit, we make sure that each component is free of defects.

We always test the fit of each piece, as each must be easy to handle and integrate. Thus, it allows you to :

save time,
to avoid the interruption of the installation due to the presence of non-conforming elements.

DELIVERY OF YOUR AIR CONDITIONING KIT ON SITE

Once your order is validated, MyDATEC will deliver your entire CMV kit to the delivery address.

The accessories supplied in this kit have been prepared on the basis of the layout diagram of the complete ventilation system. This is the assembly plan.

A cross-check by you will validate the receipt of the MyDATEC CMV kit.

VERIFICATION OF KIT CONTENTS

Once we receive your order, we invite you to proceed to a verification of the materials provided to you. This makes it possible to point out missing elements or to replace parts that may be defective.

SUPPLY OF THE ASSEMBLY PLAN

MyDATEC provides an easy-to-read assembly drawing to ensure proper installation of your HVAC system.

The assembly plan is a simplified diagram showing the connection between the elements of the system with the identification of each component. Indeed, MyDATEC uses colored legends to identify each element and their location within the network.

The assembly plan is completed by the technical document of the BET, which also contains useful technical resources for a more detailed verification of the good coordination of these elements.

TECHNICAL SUPPORT

In addition to the supply of the material and the assembly plan of the CMV network, MyDATEC also provides a technical assistance service. It guides you step by step in the assembly of your air circuit.

Our technical service is available during the opening hours of the company. We answer all your questions to help you acquire the essential notions to install your VMC.

You can
make an appointment with a certified installer
If you wish to be assisted during the installation and commissioning of your ventilation system, please contact us.

SUPPLY AND REPLACEMENT OF AIR CONDITIONING FILTERS

MyDATEC also manufactures CMV filters for
replace filters
already existing in your CMV monobloc.

Filters are easily clogged and require regular maintenance. On this point, MyDATEC gives you tips on how to clean effectively:

the filters
Extraction and insufflation vents

However, in order to guarantee the good functioning of the engine, we suggest you to replace your filter every six months if you are close to a big city or every year if you are in the countryside

We have set up a subscription to avoid you to make the purchase every year. This way the filters will arrive in your mailbox and you will remember to change them. If necessary, you can ask a MyDATEC technician to help you with custom maintenance or filter replacement.