canadian well

[download link=”https://www.mydatec.com/wp-content/uploads/2018/10/PUITS-CANADIEN_19102018.pdf”]See the technical data sheet for the CANADIAN WELL range[/download]

How does the hydraulic well work and what are the benefits?

Optimize the performance of your ventilation system by recovering calories or frigories from the ground, using a water/air coil and a water loop buried in the ground (geothermal collector). Benefit from automatic system regulation, controlled by touch screen.

 

 

well screen

Well page on the touch screen

Advantages of the Canadian well

  • Autonomous regulation
  • Double flow and thermodynamic double flow compatible
  • Visualization of the number of hot and cold operating hours and
    thermal performance of the hydraulic Canadian well

Compliance

  • Passive airtight houses
  • BEPOS / RT2012

Field of application

  • Housing (new or renovation)

Implementation

  • To be placed on the fresh air inlet duct of the double flow ventilation.
  • Ready-to-install kit (buried collector + glycol + fittings)
  • Power supply 230VAC (1.5mm²)
  • Screen connection 4 wires 0.5mm² (12V + Modbus link)
    from the Canadian well

Description

MODES OF THE HYDRAULIC CANADIAN WELL
well-1 Break
well-2 Hot Mode
well-3 Cold mode
well-4 Anti-seize mode
PARAMETER PAGES
well-5 Temperature instructions page
well-6 Page of the visualization of the operating times
well-7 Adjustment of page parameters
well-8 Information / Help

MyDATEC range

DESIGNATION REFERENCE
Canadian hydraulic well CANADIAN_WELLS_HYDRAULIC_KIT

 

Technical characteristics of the MyDatec Canadian well

well-characteristics-1Air Pressure Drop of the G-2000 Hydraulic Heat Pump

well-characteristics-2

 

Technical specifications

G-2000
Weight 15 kg
Connection diameter of the air pipes Ø200 and Ø250
Operating temperature -22 °C to 60 °C
Hot Power up to Up to 2 kW (*)
Cold power up to Up to 2.1 kW (*)
Annual gain Up to 4100 kWh (*)
Hydraulic interface 3/4
Condensate drain interface Ø32

* Assumptions

Clay soil saturated with water
Climatic zone : H2d
Sensor 100 ml
Sensor depth 4m
Air flow : 400 m3/h
Heating Well Set Point: 18°C
Cooling Well Setpoint: 22°C

well-hypothesis