CONTROL OF ELECTRIC RADIATORS AND UNDERFLOOR HEATING<\/h1><\/div>Our thermodynamic double flow vmc often need a heating supplement to ensure the comfort of the harshest winter months.<\/p>\n
Thus, MyDATEC offers to connect complementary thermostats to its CMVs. They will allow to feed a radiator or an electric floor automatically if there is a need for a supplement of energy.<\/p>\n
\n- The electric inertia heater<\/strong> offers in particular a homogeneous and economic heating<\/strong>. This inertia heater has the property of diffusing sufficient heat to preserve the comfort of the occupants.<\/li>\n
- The radiator and the underfloor heating <\/strong>can be combined with your double flow VMC<\/a> <\/strong> to maximize energy efficiency. <\/li>\n<\/ul>\n
Their control will further optimize the management of room heating, as these heating complements can be programmed automatically.<\/p>\n
No need to turn on your heating supplements yourself, the MyDATEC thermodynamic CMV does it for you!<\/p>\n
MyDATEC also offers a solution to be installed directly under a floating floor.<\/p>\n
For tertiary buildings<\/strong>, there are also ceiling solutions in the form of heated false ceiling tiles<\/p>\n<\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2021\/11\/maison-plaisance-touch-min-800x480.jpg\" "\\"maison-plaisance-touch-min\\"")
<\/span><\/div>Consult our technicians!<\/span><\/a><\/div><\/div><\/div><\/div><\/div>Our radiators: ZENIT radiant panels<\/h2>\n
Zenit is composed of a 12 mm thick tempered glass panel (8 mm for Zenit mirror), a thin heating element and a 1 ml power cable. The panels can be installed horizontally or vertically to fit your space. The glass front, thanks to its density and its comfortable emission surface, provides an exceptional radiation.<\/p>\n
Zenit is a range of radiant panels equipped with a tempered and tinted glass front panel<\/p>\n
\n- Elegant and discreet design<\/li>\n
- Maximum energy efficiency<\/li>\n
- Comfortable and immediate radiant heating<\/li>\n
- Ideal for living room, bedroom, bathroom or office…<\/li>\n
- IP 44<\/li>\n
- Class II<\/li>\n
- Power 300 to 900 W<\/li>\n
- Towel rail (optional)<\/li>\n<\/ul>\n<\/div><\/div><\/div>
Our electric floors<\/h2>\n
MilliFloor\u00ae STE turns your floor into a comfortable radiant surface. The even and constant surface temperature, adjustable up to 24\u00b0C, eliminates the problem of heavy legs. Ideal for small areas, MilliFloor\u00ae STE will make you enjoy walking barefoot on your tiles. Totally silent MilliFloor\u00ae STE does not modify the hygrometry of the room and reduces the risks of condensation.<\/p>\n
By eliminating the mixing of burnt dust, MilliFloor\u00ae STE allows you to breathe fresh and healthy air.<\/p>\n
\n- Invisible (Space release)<\/li>\n
- Very little inertia<\/li>\n
- Maintenance free<\/li>\n
- Compatible with most tiles<\/li>\n
- No risk of degradation<\/li>\n
- Security (out of reach of occupants)<\/li>\n<\/ul>\n
MilliFloor\u00ae STE is recommended for both renovation and new construction. MilliFloor\u00ae STE is very thin, less than 3.5 mm thick, and can be easily embedded in thin-set mortar or patching<\/p>\n
\n- Thanks to its thinness, it is ultra easy to regulate.<\/li>\n<\/ul>\n<\/div><\/div><\/div>
CONTROL OF ELECTRIC RADIATORS AND UNDERFLOOR HEATING SYSTEMS<\/h2>\n
Decide when to switch on the radiator and the electric floor heating to rationalize your heating consumption<\/strong>. MyDATEC gives you the benefit of a
\n connected heating that can be controlled remotely.<\/strong>
\n<\/a><\/p>\nOnce connected to the VMC network, your radiator and electric underfloor heating systems can also be connected to theMyConnect application<\/strong> to facilitate its programming.<\/p>\n3.4 Regulation and automatic control of the ventilation system<\/p>\n<\/div><\/div><\/div><\/div><\/div>
CONDITIONS TO CONTROL YOUR ELECTRIC RADIATORS AND UNDERFLOOR HEATING<\/h2>\n
The existence of a Wi-Fi router is an<\/strong> essential prerequisite<\/strong> for linking the various devices. Only with the network connection can you coordinate the operation of these elements with your VMC.<\/p>\nIn the event that the heater<\/strong> cannot be connected<\/strong>, you must connect the power cord of your radiator and electric floor heating systems with a pilot wire. Indeed, this pilot wire is a radio receiver allowing the connection to the Wi-Fi network.<\/p>\n<\/div>GIVE REMOTE INSTRUCTIONS<\/h3><\/div>The remote control gives you access to all the details of the activities of your radiator and underfloor heating <\/strong>systems. Depending on the temperature of the rooms, you can decide whether or not to switch on these two systems if you want a little more heat.<\/p>\nTheMyConnect app<\/strong> installs on your smartphone and allows you to give remote instructions. Its installation follows the same principle as the
\n remote control<\/strong>
\n<\/a> and the distribution of hot air from a pellet stove.<\/p>\nThis way you can optimize heating and power consumption<\/strong> while keeping track of your equipment.<\/p>\n<\/div>INTUITIVE VIRTUAL CONTROL OF THE HEATING SOURCES CONNECTED TO THE VENTILATION SYSTEM<\/h3><\/div>The MyConnect application allows remote control of the management of the heating sources connected to the VMC network. Simply download it to your smartphone to access the mobile control interface. It is from this interface that you will be able to manage the whole device<\/strong> whether it is :<\/p>\n\n- of the VMC,<\/li>\n
- of the radiator,<\/li>\n
- underfloor heating<\/li>\n
- or pellet stoves.<\/li>\n<\/ul>\n
With the MyConnect remote control tool, you can use a virtual control<\/strong> to manage the operation of the radiator and underfloor heating systems <\/strong>. In addition, it is possible to switch them :<\/p>\n\n- in eco mode,<\/li>\n
- in comfort mode,<\/li>\n
- in frost-free, on and off mode.<\/li>\n<\/ul>\n
Other options also optimize indoor heating management.<\/p>\n<\/div>
Our thermodynamic double flow vmc often need a heating supplement to ensure the comfort of the harshest winter months.<\/p>\n
Thus, MyDATEC offers to connect complementary thermostats to its CMVs. They will allow to feed a radiator or an electric floor automatically if there is a need for a supplement of energy.<\/p>\n
- \n
- The electric inertia heater<\/strong> offers in particular a homogeneous and economic heating<\/strong>. This inertia heater has the property of diffusing sufficient heat to preserve the comfort of the occupants.<\/li>\n
- The radiator and the underfloor heating <\/strong>can be combined with your double flow VMC<\/a> <\/strong> to maximize energy efficiency. <\/li>\n<\/ul>\n
Their control will further optimize the management of room heating, as these heating complements can be programmed automatically.<\/p>\n
No need to turn on your heating supplements yourself, the MyDATEC thermodynamic CMV does it for you!<\/p>\n
MyDATEC also offers a solution to be installed directly under a floating floor.<\/p>\n
For tertiary buildings<\/strong>, there are also ceiling solutions in the form of heated false ceiling tiles<\/p>\n<\/div>
<\/span><\/div>Consult our technicians!<\/span><\/a><\/div><\/div><\/div><\/div><\/div>Our radiators: ZENIT radiant panels<\/h2>\n
Zenit is composed of a 12 mm thick tempered glass panel (8 mm for Zenit mirror), a thin heating element and a 1 ml power cable. The panels can be installed horizontally or vertically to fit your space. The glass front, thanks to its density and its comfortable emission surface, provides an exceptional radiation.<\/p>\n
Zenit is a range of radiant panels equipped with a tempered and tinted glass front panel<\/p>\n
- \n
- Elegant and discreet design<\/li>\n
- Maximum energy efficiency<\/li>\n
- Comfortable and immediate radiant heating<\/li>\n
- Ideal for living room, bedroom, bathroom or office…<\/li>\n
- IP 44<\/li>\n
- Class II<\/li>\n
- Power 300 to 900 W<\/li>\n
- Towel rail (optional)<\/li>\n<\/ul>\n<\/div><\/div><\/div>
Our electric floors<\/h2>\n
MilliFloor\u00ae STE turns your floor into a comfortable radiant surface. The even and constant surface temperature, adjustable up to 24\u00b0C, eliminates the problem of heavy legs. Ideal for small areas, MilliFloor\u00ae STE will make you enjoy walking barefoot on your tiles. Totally silent MilliFloor\u00ae STE does not modify the hygrometry of the room and reduces the risks of condensation.<\/p>\n
By eliminating the mixing of burnt dust, MilliFloor\u00ae STE allows you to breathe fresh and healthy air.<\/p>\n
- \n
- Invisible (Space release)<\/li>\n
- Very little inertia<\/li>\n
- Maintenance free<\/li>\n
- Compatible with most tiles<\/li>\n
- No risk of degradation<\/li>\n
- Security (out of reach of occupants)<\/li>\n<\/ul>\n
MilliFloor\u00ae STE is recommended for both renovation and new construction. MilliFloor\u00ae STE is very thin, less than 3.5 mm thick, and can be easily embedded in thin-set mortar or patching<\/p>\n
- \n
- Thanks to its thinness, it is ultra easy to regulate.<\/li>\n<\/ul>\n<\/div><\/div><\/div>
CONTROL OF ELECTRIC RADIATORS AND UNDERFLOOR HEATING SYSTEMS<\/h2>\n
Decide when to switch on the radiator and the electric floor heating to rationalize your heating consumption<\/strong>. MyDATEC gives you the benefit of a
\n connected heating that can be controlled remotely.<\/strong>
\n<\/a><\/p>\nOnce connected to the VMC network, your radiator and electric underfloor heating systems can also be connected to theMyConnect application<\/strong> to facilitate its programming.<\/p>\n
3.4 Regulation and automatic control of the ventilation system<\/p>\n<\/div><\/div><\/div><\/div><\/div>
CONDITIONS TO CONTROL YOUR ELECTRIC RADIATORS AND UNDERFLOOR HEATING<\/h2>\n
The existence of a Wi-Fi router is an<\/strong> essential prerequisite<\/strong> for linking the various devices. Only with the network connection can you coordinate the operation of these elements with your VMC.<\/p>\n
In the event that the heater<\/strong> cannot be connected<\/strong>, you must connect the power cord of your radiator and electric floor heating systems with a pilot wire. Indeed, this pilot wire is a radio receiver allowing the connection to the Wi-Fi network.<\/p>\n<\/div>
GIVE REMOTE INSTRUCTIONS<\/h3><\/div>
The remote control gives you access to all the details of the activities of your radiator and underfloor heating <\/strong>systems. Depending on the temperature of the rooms, you can decide whether or not to switch on these two systems if you want a little more heat.<\/p>\n
TheMyConnect app<\/strong> installs on your smartphone and allows you to give remote instructions. Its installation follows the same principle as the
\n remote control<\/strong>
\n<\/a> and the distribution of hot air from a pellet stove.<\/p>\nThis way you can optimize heating and power consumption<\/strong> while keeping track of your equipment.<\/p>\n<\/div>
INTUITIVE VIRTUAL CONTROL OF THE HEATING SOURCES CONNECTED TO THE VENTILATION SYSTEM<\/h3><\/div>
The MyConnect application allows remote control of the management of the heating sources connected to the VMC network. Simply download it to your smartphone to access the mobile control interface. It is from this interface that you will be able to manage the whole device<\/strong> whether it is :<\/p>\n
- \n
- of the VMC,<\/li>\n
- of the radiator,<\/li>\n
- underfloor heating<\/li>\n
- or pellet stoves.<\/li>\n<\/ul>\n
With the MyConnect remote control tool, you can use a virtual control<\/strong> to manage the operation of the radiator and underfloor heating systems <\/strong>. In addition, it is possible to switch them :<\/p>\n
- \n
- in eco mode,<\/li>\n
- in comfort mode,<\/li>\n
- in frost-free, on and off mode.<\/li>\n<\/ul>\n
Other options also optimize indoor heating management.<\/p>\n<\/div>
- Thanks to its thinness, it is ultra easy to regulate.<\/li>\n<\/ul>\n<\/div><\/div><\/div>
- The radiator and the underfloor heating <\/strong>can be combined with your double flow VMC<\/a> <\/strong> to maximize energy efficiency. <\/li>\n<\/ul>\n