{"id":9081,"date":"2021-11-28T17:53:27","date_gmt":"2021-11-28T16:53:27","guid":{"rendered":"https:\/\/www.mydatec.com\/vmc-double-flux-thermodynamic-smart-h\/"},"modified":"2022-07-19T23:16:59","modified_gmt":"2022-07-19T22:16:59","slug":"vmc-double-flux-thermodynamic-smart-h","status":"publish","type":"page","link":"https:\/\/www.mydatec.com\/en\/vmc-double-flux-thermodynamic-smart-h\/","title":{"rendered":"3.2.2 Smart H horizontal thermodynamic ventilation"},"content":{"rendered":"

SMART H HORIZONTAL THERMODYNAMIC DOUBLE FLOW<\/h1><\/div>
<\/span><\/div>

The ideal solution for cooling in summer<\/strong> and increasing thermal comfort in winter<\/strong>, the
\n SMART H thermodynamic double flow ventilation system<\/strong>
\n<\/a> also improves the
\n air quality<\/strong>
\n<\/a> . Save energy<\/strong> while increasing the efficiency of your HVAC system!<\/p>\n<\/div>

<\/span><\/div>

SMART H uses the energy already present in the building<\/strong> and can multiply the power of this energy in order to satisfy the heating and cooling needs.
\nIdeal installation in technical rooms or insulated attics, but also above the false ceiling of a tertiary building (50-60 cm)
\nEverything you need to know about the SMART H CMV, its characteristics,
\n its operation<\/strong>
\n<\/a>,
\n its regulation<\/strong>
\n<\/a>,
\n its advantages<\/strong>
\n<\/a>its
\n complementary systems<\/strong>
\n<\/a><\/p>\n<\/div><\/div><\/div><\/div><\/div>

DESCRIPTION AND CHARACTERISTICS OF THE SMART H THERMODYNAMIC DOUBLE FLOW VENTILATION SYSTEM<\/h2><\/div>

The Smart H CMV is a
\n controlled mechanical ventilation<\/strong>
\n<\/a> double flow<\/strong> with thermodynamic recovery.
\n Horizontal<\/strong> type (H<\/strong>), Smart H can be installed under the ceiling with its good compactness, 110 cm wide for 40 cm high.
\nVery appreciated in tertiary buildings<\/strong>, this VMC can equip a nursery, a medical space, an office or a training room. The Smart H is well suited to all housing projects, whether new or renovated.<\/p>\n

Here is an example of a dual-zone single-family home configuration:<\/p>\n<\/div>

<\/span><\/div>

Below is another example of a machine start as a replacement for an existing system:<\/p>\n<\/div>

<\/span><\/div>

A COMPACT MONOBLOC<\/h3><\/div>

Smart H consists of a compact monoblock<\/strong> without outdoor unit, which integrates the extract air heat pump and a rotary compressor.
\nIt is also equipped with low consumption fans<\/strong> and the insufflation extraction flow is adjustable.
\nSuch a system is very easy to install in a technical room thanks to its reduced dimensions and a great modularity of the air outlets.
\nThanks to its assembly in the factory, the thermodynamic circuit is immediately operational after the finalization of the associated aeraulic installation and the electrical connections. It is not necessary to use a certified installer for the use of refrigerant gas<\/p>\n<\/div>

UP TO 3.1KW OF PAC POWER SUPPLIED BY CLEAN ENERGY<\/h3><\/div>

With its heat energy reserve<\/strong>, the Smart H central heating unit is able to provide up to 3.1kW of power. It can be associated with one or two additional heaters on the air supply.
\nIt can produce up to 6 kW if combined with additional heaters<\/strong>.
\nIn active cooling mode, it also offers a cooling capacity<\/strong> of 2.67 kW of cooling capacity for temperature conditions of 35\u00b0C outside\/27\u00b0C inside.<\/p>\n<\/div>

INTUITIVE CONTROL FOR REMOTE CONTROL<\/h3><\/div>

A centralized touch control allows you to adjust the temperature<\/strong> by indicating the set points for heating and cooling.
\nYou canalso adjust the thermostat directly from your smartphone<\/strong> when you connect your mobile device with your installation via wifi.
\nThe VMC automatically regulates itself according to the temperature, humidity and VOC (indoor pollutants) set points in each of the 2 zones.<\/p>\n

All the settings are available, including the active cooling mode, free cooling (free cooling at night) and over-ventilation to dehumidify and depollute.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

OPERATION<\/h2><\/div>

The 3 elements that guarantee a good functioning of the Smart V<\/h3><\/div>

In the same way as the VMC
\n Smart H<\/strong>
\n<\/a> Smart V has three main elements that guarantee a good performance of the system:
\n\u25cf The ventilation network<\/strong> consisting of the clean circuit for incoming air and the exhaust air circuit.
\n\u25cf Thethermodynamic exchanger<\/strong> which allows the transformation of the extracted energy to thus heat or cool the hygienic new air arriving in the living rooms. This is a heat pump on reversible extracted air<\/strong><\/a> which provides heating in winter and cooling in summer.
\n\u25cf Intelligent<\/strong> system control<\/strong> according to your temperature settings<\/p>\n<\/div>

<\/span><\/div><\/div><\/div><\/div><\/div>

ADVANTAGES OF THE SMART H DUAL-FLOW VENTILATION SYSTEM<\/h2><\/div>

– In winter, maximum recovery of heat from the extracted air regardless of the outside temperature conditions.
\n– Reduced consumption for heating (high performance heat pump).
\n– Air recovery near a stove and redistribution throughout the premises
\n– Free cooling
\n– Improvement of summer comfort by cooling and dehumidifying the new air (possible thanks to the reversibility of the system).
\n– Internal air quality control. Renewed air and high efficiency filtration
\n– Low consumption fan
\n– Low noise level
\n– Simplified installation: compactness of the unit, modularity of connections adaptable to all room configurations, integrated refrigeration circuit.
\n– Easy maintenance, filter change indication.
\n– For a horizontal installation in attic or reduced space (minimum height 500 mm) the installation will be carried out on anti-vibration pads, suspended or with a wall fixing.<\/p>\n<\/div><\/div><\/div>

SMART H UNIT MODELS<\/h2><\/div>

The Smart H CMV is available in two models with different capacities and power<\/strong> ratings. Both can equip
\n homes, offices, medical practices, nurseries…<\/strong>
\n<\/a>
\nWe can treat with a single machine rooms from 60 to 220m\u00b2.
\nWe can also multiply the systems if the premises are larger or more specific.<\/p>\n<\/div>

Description and technical characteristics of the Smart H 200 and Smart H 300<\/h3><\/div>