{"id":9052,"date":"2021-11-28T17:21:22","date_gmt":"2021-11-28T16:21:22","guid":{"rendered":"https:\/\/www.mydatec.com\/vmc-double-flux-thermodynamic-smart-v\/"},"modified":"2022-07-27T09:58:34","modified_gmt":"2022-07-27T08:58:34","slug":"vmc-double-flux-thermodynamic-smart-v","status":"publish","type":"page","link":"https:\/\/www.mydatec.com\/en\/vmc-double-flux-thermodynamic-smart-v\/","title":{"rendered":"3.2.1 Smart V vertical thermodynamic ventilation"},"content":{"rendered":"

VERTICAL THERMODYNAMIC VMC SMART V<\/h1><\/div>

The SMART V thermodynamic double flow ventilation system<\/strong> <\/a>is a reactive, high-performance and versatile system that can
\n Efficiently renew the indoor air<\/strong>
\n<\/a> to provide a large part of the heating and cooling needs. This system offers a good level of energy efficiency to meet the needs of individual residences.
\nSmall overview of the SMART V CMV: its characteristics, its regulation,
\n its operation<\/strong>
\n<\/a> ,
\n its advantages<\/a>
\n<\/strong> and the complementary systems proposed by MyDATEC<\/p>\n<\/div>

<\/span><\/div><\/div><\/div><\/div><\/div>

DESCRIPTION AND CHARACTERISTICS OF THE SMART V UNIT<\/h2><\/div>

The Smart V unit is a controlled mechanical ventilation<\/strong> <\/a>double flow with thermodynamic recovery.
\nVertical type (V<\/strong>), Smart V can be installed in an insulated and heated room. With a width of 86 cm and a height of 91 cm, its location must be at least 2.2m high to facilitate the passage of the ducts.
\nA
\n air kit<\/strong>
\n<\/a> is supplied with the Smart V thermodynamic double flow unit. It is mainly composed of ducts, grilles, air inlets and outlets, VMC grilles and distribution boxes.
\nThis kit is designed with the customer according to the constraints of the project. A color-coded layout is provided to facilitate installation.<\/p>\n

Here is an example of a dual-zone single-family home configuration:<\/p>\n<\/div>

<\/span><\/div>

A SILENT VMC WITHOUT OUTDOOR UNIT<\/h3><\/div>

Without an outdoor unit, Smart V is composed of a compact monoblock<\/strong> integrating an extract air heat pump with its rotary compressor.
\nIt is equipped with a low consumption fan<\/strong> with an EC ERP 2019 certification<\/strong> and its extraction rate can be adjusted.
\nWith its thermo-acoustic insulation<\/strong>, its heat pump remains very quiet.<\/p>\n<\/div>

AN EFFICIENT HEATING SYSTEM<\/h3><\/div>

The Smart V central heating unit uses free energy from the extracted air to provide up to 3 kW of heating to the fresh air entering the living<\/strong> rooms.
\nThat is to say approximately +27\u00b0C additional to the temperature of the outside air which enters the housing.
\nThe smart V can produce up to 6 kW if combined with additional heaters<\/strong>.
\nWhen in “active cooling” mode, the Smart V delivers approximately 2.67 kW of power.
\nA bi-zone regulation on the insufflation makes it possible to direct this hot or cold air in an intelligent way in the various parts of the housing according to the day\/night zone settings.
\nA reasoned and well-targeted energy production is in line with the convictions of everyone to preserve the environment while having a good indoor comfort.<\/p>\n<\/div>

INTUITIVE OPERATION AND INTELLIGENT CONTROL<\/h3><\/div>

A centralized touch control allows you to adjust the temperature<\/strong> by indicating the set points for heating and cooling.
\nYou can also adjust the thermostat directly from your smartphone<\/strong> when you connect your mobile device with your installation via wifi.
\nThe VMC automatically regulates itself according to the temperature, humidity and VOC (indoor pollutants) set points in each of the 2 zones.<\/p>\n

All the settings are available, including the active cooling mode, free cooling (free cooling at night) and over-ventilation to dehumidify and depollute.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

OPERATION<\/h2><\/div>

The 3 elements that guarantee a good functioning of the Smart V<\/h3><\/div>

In the same way as the VMC
\n Smart H<\/strong>
\n<\/a> Smart V has three main elements that guarantee a good performance of the system:
\n\u25cf The ventilation network<\/strong> consisting of the clean circuit for incoming air and the exhaust air circuit.
\n\u25cf The thermodynamic exchanger<\/strong> which allows the transformation of the extracted energy to thus heat or cool the hygienic new air arriving in the living rooms. This is aa heat pump on reversible extracted air<\/strong> <\/a>which provides heating in winter and cooling in summer.
\n\u25cf Intelligent<\/strong> system control<\/strong> according to your temperature settings<\/p>\n<\/div>

Smart V Series Application<\/h3><\/div>

Such a system isvery easy to <\/strong>install in a technical room thanks to its reduced size. Thanks to its assembly in the factory, the thermodynamic circuit is immediately operational after the finalization of the associated aeraulic installation and the electrical connections. It is not necessary to use a certified installer for the use of refrigerant gas.<\/p>\n<\/div>

<\/span><\/div>

Its aeraulic characteristics are the optimal solution for indoor comfort<\/strong> in residential housing and small tertiary premises with good thermal insulation.<\/p>\n

This solution for the heating of the air compensates the thermal loss of<\/strong> the introduction of new air in winter and contributes to the heating, (completely for the premises with low energy needs), in summer, the inversion of cycle will compensate the contributions of heat.<\/p>\n<\/div><\/div><\/div><\/div><\/div>

ADVANTAGES OF THE SMART V DUAL-FLOW AIR HANDLING UNIT<\/h2><\/div>

The SMART V has a number of advantages:<\/p>\n

<\/strong>In winter, maximum recovery of heat from the extracted air regardless of the outside temperature conditions.<\/p>\n