VMC AND HEAT PUMP<\/h1><\/div><\/div><\/div><\/div><\/div>Principle of ventilation<\/h3><\/div>Your home is loaded with heat from multiple sources<\/p>\n
\n- The bathroom, for example when you take a shower<\/li>\n
- The kitchen, when cooking food<\/li>\n
- Household appliances (washing machine, dryer, oven)<\/li>\n
- Its occupants simply …<\/li>\n<\/ul>\n
This air loaded with heat energy is generally polluted, and it must be evacuated by rejecting it outside to replace it by new air, coming from outside. This is the principle of ventilation.<\/p>\n<\/div>
Better than a double flow, a new generation of CMV…<\/h3><\/div>While a classic double flow system passively recovers part of the heat contained in the extracted air before rejecting it outside, the MyDATEC thermodynamic ventilation system recovers the heat power of the extracted air, which allows it to actively regulate the temperature of your home.
\nThe system feeds on the heat extracted from the dwelling for the needs of ventilation, wrings out the calories by a patented system of PAC on extracted air and gives them back to a healthy and clean air, before diffusing it in the whole house.<\/p>\n<\/div>
The little extra: summer comfort<\/h3><\/div>Thanks to its heat pump on reversible extracted air, the MyDATEC thermodynamic CMV can also bring a cooling power to your house via the ventilation network.
\nThus, MyDATEC provides heating and cooling power to maintain comfort conditions inside the house, while remaining an ecological solution based on renewable energy.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
Principle of a heat pump<\/h2><\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/02\/Une-pompe-a-chaleur-ou-PAC.png\" "\\"Une")
<\/span><\/div><\/div><\/div>Definition of a heat pump<\/h3><\/div>A heat pump or PAC is a thermodynamic device that takes heat from one medium (e.g. air, water, earth) to transfer it to another (e.g. in a home to heat it). The refrigerator is the best known heat pump system. A reversible heat pump will produce coolness in summer and heat in winter.<\/p>\n<\/div><\/div><\/div>
There are 3 main types of heat pumps:<\/p>\n
\n- Air\/air heat pump<\/strong>: the heat is taken from the air and transferred directly to the air in the room to be heated or cooled.<\/li>\n<\/ul>\n<\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/02\/Pompe-a-chaleur-air-air.png\" "\\"Pompe")
<\/span><\/div>\n- Air\/water heat pump<\/strong>: the heat is taken from the air and transferred to a water circuit that will supply a floor and\/or ceiling heating and\/or cooling, fan coil radiators or aerothermal heaters.<\/li>\n<\/ul>\n<\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/02\/Pompe-a-chaleur-air-eau.png\" "\\"Pompe")
<\/span><\/div>\n- Water\/water heat pump<\/strong>: the system takes heat from a water circuit in contact with an element that will supply it with heat (earth, groundwater) and transfers it to another water circuit<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Principle of an extract air heat pump<\/h3><\/div>Inside the MyDATEC thermodynamic unit, the first air flow (Extraction -> External discharge) passes through an “evaporator” heat exchanger battery. The air flow transfers the heat contained in the air to the heat transfer fluid of the thermodynamic cycle. The air flow of a temperature of approximately 20\u00b0C at the extraction is rejected, after having given up its calories, towards the outside at a temperature of approximately 2\u00b0C.<\/p>\n
At the same time, the second air flow (Fresh air outside -> Insufflation in the dwelling) crosses a second exchanger battery “Condenser”. The air flow recovers the heat from the heat transfer fluid of the thermodynamic cycle. The temperature increase between the new air, taken from outside the dwelling, and the air blown into the dwelling is about 35\u00b0C. This means that for an outside air temperature of 0\u00b0C, the insufflation in the dwelling is about 35\u00b0C.<\/p>\n
\n- The two air flows are very distinct and there is no mixing between the two air flows, which ensures the perfect renewal of the fresh air in the dwelling.<\/li>\n<\/ul>\n
The use of a heat pump system, with a thermodynamic cycle, allows, contrary to the static double flow system (with static exchanger) to heat the incoming air to a temperature higher than the temperature of the extracted air (20\u00b0C) of the dwelling allowing to ensure, according to the losses of the dwelling, all or part of the heating need<\/p>\n<\/div>
Principle of ventilation<\/h3><\/div>Your home is loaded with heat from multiple sources<\/p>\n
\n- The bathroom, for example when you take a shower<\/li>\n
- The kitchen, when cooking food<\/li>\n
- Household appliances (washing machine, dryer, oven)<\/li>\n
- Its occupants simply …<\/li>\n<\/ul>\n
This air loaded with heat energy is generally polluted, and it must be evacuated by rejecting it outside to replace it by new air, coming from outside. This is the principle of ventilation.<\/p>\n<\/div>
Better than a double flow, a new generation of CMV…<\/h3><\/div>While a classic double flow system passively recovers part of the heat contained in the extracted air before rejecting it outside, the MyDATEC thermodynamic ventilation system recovers the heat power of the extracted air, which allows it to actively regulate the temperature of your home.
\nThe system feeds on the heat extracted from the dwelling for the needs of ventilation, wrings out the calories by a patented system of PAC on extracted air and gives them back to a healthy and clean air, before diffusing it in the whole house.<\/p>\n<\/div>
The little extra: summer comfort<\/h3><\/div>Thanks to its heat pump on reversible extracted air, the MyDATEC thermodynamic CMV can also bring a cooling power to your house via the ventilation network.
\nThus, MyDATEC provides heating and cooling power to maintain comfort conditions inside the house, while remaining an ecological solution based on renewable energy.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
Principle of a heat pump<\/h2><\/div><\/div><\/div><\/span><\/div><\/div><\/div>Definition of a heat pump<\/h3><\/div>A heat pump or PAC is a thermodynamic device that takes heat from one medium (e.g. air, water, earth) to transfer it to another (e.g. in a home to heat it). The refrigerator is the best known heat pump system. A reversible heat pump will produce coolness in summer and heat in winter.<\/p>\n<\/div><\/div><\/div>
There are 3 main types of heat pumps:<\/p>\n
\n- Air\/air heat pump<\/strong>: the heat is taken from the air and transferred directly to the air in the room to be heated or cooled.<\/li>\n<\/ul>\n<\/div><\/span><\/div>
\n- Air\/water heat pump<\/strong>: the heat is taken from the air and transferred to a water circuit that will supply a floor and\/or ceiling heating and\/or cooling, fan coil radiators or aerothermal heaters.<\/li>\n<\/ul>\n<\/div><\/span><\/div>
\n- Water\/water heat pump<\/strong>: the system takes heat from a water circuit in contact with an element that will supply it with heat (earth, groundwater) and transfers it to another water circuit<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Principle of an extract air heat pump<\/h3><\/div>Inside the MyDATEC thermodynamic unit, the first air flow (Extraction -> External discharge) passes through an “evaporator” heat exchanger battery. The air flow transfers the heat contained in the air to the heat transfer fluid of the thermodynamic cycle. The air flow of a temperature of approximately 20\u00b0C at the extraction is rejected, after having given up its calories, towards the outside at a temperature of approximately 2\u00b0C.<\/p>\n
At the same time, the second air flow (Fresh air outside -> Insufflation in the dwelling) crosses a second exchanger battery “Condenser”. The air flow recovers the heat from the heat transfer fluid of the thermodynamic cycle. The temperature increase between the new air, taken from outside the dwelling, and the air blown into the dwelling is about 35\u00b0C. This means that for an outside air temperature of 0\u00b0C, the insufflation in the dwelling is about 35\u00b0C.<\/p>\n
\n- The two air flows are very distinct and there is no mixing between the two air flows, which ensures the perfect renewal of the fresh air in the dwelling.<\/li>\n<\/ul>\n
The use of a heat pump system, with a thermodynamic cycle, allows, contrary to the static double flow system (with static exchanger) to heat the incoming air to a temperature higher than the temperature of the extracted air (20\u00b0C) of the dwelling allowing to ensure, according to the losses of the dwelling, all or part of the heating need<\/p>\n<\/div>
Your home is loaded with heat from multiple sources<\/p>\n
- \n
- The bathroom, for example when you take a shower<\/li>\n
- The kitchen, when cooking food<\/li>\n
- Household appliances (washing machine, dryer, oven)<\/li>\n
- Its occupants simply …<\/li>\n<\/ul>\n
This air loaded with heat energy is generally polluted, and it must be evacuated by rejecting it outside to replace it by new air, coming from outside. This is the principle of ventilation.<\/p>\n<\/div>
Better than a double flow, a new generation of CMV…<\/h3><\/div>
While a classic double flow system passively recovers part of the heat contained in the extracted air before rejecting it outside, the MyDATEC thermodynamic ventilation system recovers the heat power of the extracted air, which allows it to actively regulate the temperature of your home.
\nThe system feeds on the heat extracted from the dwelling for the needs of ventilation, wrings out the calories by a patented system of PAC on extracted air and gives them back to a healthy and clean air, before diffusing it in the whole house.<\/p>\n<\/div>The little extra: summer comfort<\/h3><\/div>
Thanks to its heat pump on reversible extracted air, the MyDATEC thermodynamic CMV can also bring a cooling power to your house via the ventilation network.
\nThus, MyDATEC provides heating and cooling power to maintain comfort conditions inside the house, while remaining an ecological solution based on renewable energy.<\/p>\n<\/div><\/div><\/div><\/div><\/div>Principle of a heat pump<\/h2><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div>Definition of a heat pump<\/h3><\/div>
A heat pump or PAC is a thermodynamic device that takes heat from one medium (e.g. air, water, earth) to transfer it to another (e.g. in a home to heat it). The refrigerator is the best known heat pump system. A reversible heat pump will produce coolness in summer and heat in winter.<\/p>\n<\/div><\/div><\/div>
There are 3 main types of heat pumps:<\/p>\n
- \n
- Air\/air heat pump<\/strong>: the heat is taken from the air and transferred directly to the air in the room to be heated or cooled.<\/li>\n<\/ul>\n<\/div><\/span><\/div>
- \n
- Air\/water heat pump<\/strong>: the heat is taken from the air and transferred to a water circuit that will supply a floor and\/or ceiling heating and\/or cooling, fan coil radiators or aerothermal heaters.<\/li>\n<\/ul>\n<\/div><\/span><\/div>
- \n
- Water\/water heat pump<\/strong>: the system takes heat from a water circuit in contact with an element that will supply it with heat (earth, groundwater) and transfers it to another water circuit<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
Principle of an extract air heat pump<\/h3><\/div>
Inside the MyDATEC thermodynamic unit, the first air flow (Extraction -> External discharge) passes through an “evaporator” heat exchanger battery. The air flow transfers the heat contained in the air to the heat transfer fluid of the thermodynamic cycle. The air flow of a temperature of approximately 20\u00b0C at the extraction is rejected, after having given up its calories, towards the outside at a temperature of approximately 2\u00b0C.<\/p>\n
At the same time, the second air flow (Fresh air outside -> Insufflation in the dwelling) crosses a second exchanger battery “Condenser”. The air flow recovers the heat from the heat transfer fluid of the thermodynamic cycle. The temperature increase between the new air, taken from outside the dwelling, and the air blown into the dwelling is about 35\u00b0C. This means that for an outside air temperature of 0\u00b0C, the insufflation in the dwelling is about 35\u00b0C.<\/p>\n
- \n
- The two air flows are very distinct and there is no mixing between the two air flows, which ensures the perfect renewal of the fresh air in the dwelling.<\/li>\n<\/ul>\n
The use of a heat pump system, with a thermodynamic cycle, allows, contrary to the static double flow system (with static exchanger) to heat the incoming air to a temperature higher than the temperature of the extracted air (20\u00b0C) of the dwelling allowing to ensure, according to the losses of the dwelling, all or part of the heating need<\/p>\n<\/div>
- The two air flows are very distinct and there is no mixing between the two air flows, which ensures the perfect renewal of the fresh air in the dwelling.<\/li>\n<\/ul>\n
- Water\/water heat pump<\/strong>: the system takes heat from a water circuit in contact with an element that will supply it with heat (earth, groundwater) and transfers it to another water circuit<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/div><\/div>
- Air\/water heat pump<\/strong>: the heat is taken from the air and transferred to a water circuit that will supply a floor and\/or ceiling heating and\/or cooling, fan coil radiators or aerothermal heaters.<\/li>\n<\/ul>\n<\/div>
- Air\/air heat pump<\/strong>: the heat is taken from the air and transferred directly to the air in the room to be heated or cooled.<\/li>\n<\/ul>\n<\/div>