Your tactile control<\/h1><\/div>See the Tactile Control data sheet<\/span><\/a><\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/tactile-24072017.jpg\" "\\"tactile-24072017\\"")
<\/span><\/div><\/div><\/div><\/div><\/div>Benefits<\/h3><\/div>\n- Touchscreen interface<\/li>\n
- Temperature sensor<\/li>\n
- Humidity sensor<\/li>\n
- Volatile Organic Compounds (VOC) sensor<\/li>\n<\/ul>\n<\/div>
Principles<\/h3><\/div>\n\n\n\n\n<\/th>\n DISPLAY<\/th>\n<\/tr>\n<\/thead>\n \n\n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-automatique-on.png\")
<\/td>\nOn \/ off<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-9.png\")
<\/td>\nHeating \/ Cooling<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-10.png\")
<\/td>\nEco \/ Boost<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-11.png\")
<\/td>\nHigh activation \/ deactivation
\ntimed extraction speed<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-4.png\")
<\/td>\nComfort temperature setting<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-automatique-qualite-air.jpg\")
<\/td>\nIndoor air quality control<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-7.png\")
<\/td>\nWeekly programming<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-5.png\")
<\/td>\nFilter clogging management<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-3.png\")
<\/td>\nConsumption<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-informations.jpg\")
<\/td>\nSystem information<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-automatique-etalonnage.jpg\")
<\/td>\nProbe calibration<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-automatique-reglage.jpg\")
<\/td>\nInstaller settings
\n(under password)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nField of application<\/h3><\/div>\n- Housing (new or renovation)<\/li>\n
- Tertiary<\/li>\n
- Replacement of old systems<\/li>\n<\/ul>\n<\/div>\n\n
\n\n\nMarkets<\/th>\n Number of control points<\/th>\n Touch screen<\/th>\n Air quality sensor (*1)<\/th>\n Change over (*2)<\/th>\n<\/tr>\n<\/thead>\n \n\nReplacement<\/td>\n 1<\/td>\n 1<\/td>\n 0<\/td>\n No<\/td>\n<\/tr>\n \nHabitat<\/td>\n 2<\/td>\n 1<\/td>\n 1(T+%)<\/td>\n No<\/td>\n<\/tr>\n \nHabitat (VOC)<\/td>\n 2<\/td>\n 1<\/td>\n 2(T+%+COV)<\/td>\n No<\/td>\n<\/tr>\n \nTertiary automatic<\/td>\n 2<\/td>\n 1<\/td>\n 1(T+%+COV)<\/td>\n Yes<\/td>\n<\/tr>\n \nTertiary<\/td>\n 2<\/td>\n 1<\/td>\n 2(T+%+COV)<\/td>\n No<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n(*1) MyDATEC air quality sensors are available in two versions:<\/strong>
\nBase: T+%, Temperature sensor + Humidity sensor
\nVOC: T+%+VOC, Temperature sensor + Humidity sensor + VOC sensor<\/p>\n(*2) Change Over :<\/strong>
\nIt is a specific interface for the tertiary market allowing the automatic switch from heating to cooling mode and vice versa. The operator only needs to enter a heating and cooling setpoint temperature and the system automatically changes its operating mode depending on the room temperature.<\/p>\nIn the Tertiary versions :<\/strong>
\nThe touch screen can be in a remote location not accessible to users (e.g. closet or management room) as the temperature sensor is not used in these configurations. This allows, for example, in the case of a teaching room, that the regulation control is not accessible to the people who operate the place.<\/p>\n<\/div>Description<\/h3><\/div>\n\n\n<\/thead>\n\n\n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-1.png\")
<\/td>\n– Dimensions : W 60 mm \/ H 70 mm \/ D 23 mm
\n– Brushed stainless steel cover finish
\n– Power supply: 5 VDC from MyDATEC control unit
\n– Communication: MODBUS RS485
\n– Connection: 4 wires (2xAlim. + 2xModbus)
\n– Integrates perfectly into your environment, with flush or surface mounting<\/td>\n<\/tr>\n \n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-2.jpg\")
<\/td>\n– Dimensions : W85 mm \/ H85 mm \/ D20 mm
\n– Cream polypropylene frame
\n– 320 x 240 pixel color screen
\n– Resistive touch panel
\n– Power supply: 12V VDC from MyDATEC control unit
\n– Communication: Modbus RS485
\n– Connection: 4 wires (2xAlim. + 2xModbus)
\n– Fits perfectly into your environment<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nSystem security<\/h3><\/div>– High Pressure Protection
\n– Low pressure protection (leakage)
\n– Maximum blowing temperature
\n– Extracted air temperature too low
\n– Compressor start-up fault
\n– Temperature sensor fault<\/p>\n<\/div>
Technical specifications<\/h3><\/div>The control of your comfort and your indoor air quality<\/strong><\/p>\nThe MyDATEC system allows a heating (Winter mode – Heating) and cooling (Summer mode – Cooling) contribution. The system is controlled by one or two indoor temperature sensors allowing a management on a single zone or on two zones (Day Zone + Night Zone).
\nIn addition to this temperature comfort management, the MyDATEC air quality sensor has a humidity sensor and a Volatile Organic Compound (VOC) sensor, depending on the chosen configuration. This information on your indoor air quality allows you to regulate your air renewal rates in order to maintain a good quality of your indoor air through a more or less important fresh air renewal in your home.<\/p>\n<\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-caracteristique-2.jpg\" "\\"pilotage-tactile-caracteristique-2\\"")
<\/span><\/div>Comfort zone via temperature and humidity<\/p>\n<\/div>\n
\n\n<\/thead>\n\n\n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-tertiaire1.jpg\")
<\/td>\n![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-tactile-tertiare2.jpg\")
\nEvolution of VOC and CO2 levels in a meeting roomVOCs have a direct impact on health.
\nSeveral air quality standards (Cf OQAI: Observatoire de la Qualit\u00e9 de l’air Int\u00e9rieur) have in the past pointed the finger at indoor air pollution by VOCs from
\nfurniture glues, cleaning products, etc.
\nAlso, MyDATEC’s research has allowed us to correlate CO2 pollution (human presence) with VOC pollution, the VOC sensor being more reactive
\nthan the CO2 sensor. In fact, the presence of humans necessarily leads to VOC pollution in the air due to the presence of alcohols contained in cosmetic products and
\nperfumes.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div><\/div><\/div><\/div>Dual-zone option<\/h2><\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/Option-bizone.jpg\" "\\"Option-bizone\\"")
<\/span><\/div><\/div><\/div>Explanation<\/h3><\/div>The insufflation network of the MyDATEC device is divided into two outlets. A first departure towards the insufflations of the Zone known as of Day and a second departure towards the insufflations of the Zone known as of Night.
\nThe operation of the BIZONE option is to concentrate a large part of the heating or cooling power of the MyDATEC unit on the zone in demand when only one of the two zones is in demand.
\nThe dual-flow damper allows a maximum flow rate of 60 m\u00b3\/h to pass through the insufflation branch on which it is mounted, if it is not activated (closed at rest). If it is activated (opened under voltage), the flow is no longer limited.
\nThe operation of the BIZONE is totally automatic, you don’t have to do anything to make it work. However, information is available on your
\n touch screen<\/strong>
\n<\/a> to show you how it works.<\/p>\n<\/div><\/div><\/div><\/div><\/div>Your remote control<\/h2><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>Benefits<\/h3><\/div>\n- Touchscreen interface<\/li>\n
- Temperature sensor<\/li>\n
- Humidity sensor<\/li>\n
- Volatile Organic Compounds (VOC) sensor<\/li>\n<\/ul>\n<\/div>
Principles<\/h3><\/div>\n\n\n\n\n<\/th>\n DISPLAY<\/th>\n<\/tr>\n<\/thead>\n \n\n<\/td>\n On \/ off<\/td>\n<\/tr>\n \n<\/td>\n Heating \/ Cooling<\/td>\n<\/tr>\n \n<\/td>\n Eco \/ Boost<\/td>\n<\/tr>\n \n<\/td>\n High activation \/ deactivation
\ntimed extraction speed<\/td>\n<\/tr>\n \n<\/td>\n Comfort temperature setting<\/td>\n<\/tr>\n \n<\/td>\n Indoor air quality control<\/td>\n<\/tr>\n \n<\/td>\n Weekly programming<\/td>\n<\/tr>\n \n<\/td>\n Filter clogging management<\/td>\n<\/tr>\n \n<\/td>\n Consumption<\/td>\n<\/tr>\n \n<\/td>\n System information<\/td>\n<\/tr>\n \n<\/td>\n Probe calibration<\/td>\n<\/tr>\n \n<\/td>\n Installer settings
\n(under password)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nField of application<\/h3><\/div>\n- Housing (new or renovation)<\/li>\n
- Tertiary<\/li>\n
- Replacement of old systems<\/li>\n<\/ul>\n<\/div>\n\n
\n\n\nMarkets<\/th>\n Number of control points<\/th>\n Touch screen<\/th>\n Air quality sensor (*1)<\/th>\n Change over (*2)<\/th>\n<\/tr>\n<\/thead>\n \n\nReplacement<\/td>\n 1<\/td>\n 1<\/td>\n 0<\/td>\n No<\/td>\n<\/tr>\n \nHabitat<\/td>\n 2<\/td>\n 1<\/td>\n 1(T+%)<\/td>\n No<\/td>\n<\/tr>\n \nHabitat (VOC)<\/td>\n 2<\/td>\n 1<\/td>\n 2(T+%+COV)<\/td>\n No<\/td>\n<\/tr>\n \nTertiary automatic<\/td>\n 2<\/td>\n 1<\/td>\n 1(T+%+COV)<\/td>\n Yes<\/td>\n<\/tr>\n \nTertiary<\/td>\n 2<\/td>\n 1<\/td>\n 2(T+%+COV)<\/td>\n No<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n(*1) MyDATEC air quality sensors are available in two versions:<\/strong>
\nBase: T+%, Temperature sensor + Humidity sensor
\nVOC: T+%+VOC, Temperature sensor + Humidity sensor + VOC sensor<\/p>\n(*2) Change Over :<\/strong>
\nIt is a specific interface for the tertiary market allowing the automatic switch from heating to cooling mode and vice versa. The operator only needs to enter a heating and cooling setpoint temperature and the system automatically changes its operating mode depending on the room temperature.<\/p>\nIn the Tertiary versions :<\/strong>
\nThe touch screen can be in a remote location not accessible to users (e.g. closet or management room) as the temperature sensor is not used in these configurations. This allows, for example, in the case of a teaching room, that the regulation control is not accessible to the people who operate the place.<\/p>\n<\/div>Description<\/h3><\/div>\n\n\n<\/thead>\n\n\n<\/td>\n – Dimensions : W 60 mm \/ H 70 mm \/ D 23 mm
\n– Brushed stainless steel cover finish
\n– Power supply: 5 VDC from MyDATEC control unit
\n– Communication: MODBUS RS485
\n– Connection: 4 wires (2xAlim. + 2xModbus)
\n– Integrates perfectly into your environment, with flush or surface mounting<\/td>\n<\/tr>\n \n<\/td>\n – Dimensions : W85 mm \/ H85 mm \/ D20 mm
\n– Cream polypropylene frame
\n– 320 x 240 pixel color screen
\n– Resistive touch panel
\n– Power supply: 12V VDC from MyDATEC control unit
\n– Communication: Modbus RS485
\n– Connection: 4 wires (2xAlim. + 2xModbus)
\n– Fits perfectly into your environment<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nSystem security<\/h3><\/div>– High Pressure Protection
\n– Low pressure protection (leakage)
\n– Maximum blowing temperature
\n– Extracted air temperature too low
\n– Compressor start-up fault
\n– Temperature sensor fault<\/p>\n<\/div>
Technical specifications<\/h3><\/div>The control of your comfort and your indoor air quality<\/strong><\/p>\nThe MyDATEC system allows a heating (Winter mode – Heating) and cooling (Summer mode – Cooling) contribution. The system is controlled by one or two indoor temperature sensors allowing a management on a single zone or on two zones (Day Zone + Night Zone).
\nIn addition to this temperature comfort management, the MyDATEC air quality sensor has a humidity sensor and a Volatile Organic Compound (VOC) sensor, depending on the chosen configuration. This information on your indoor air quality allows you to regulate your air renewal rates in order to maintain a good quality of your indoor air through a more or less important fresh air renewal in your home.<\/p>\n<\/div>
<\/span><\/div>Comfort zone via temperature and humidity<\/p>\n<\/div>\n
\n\n<\/thead>\n\n\n<\/td>\n
\nEvolution of VOC and CO2 levels in a meeting roomVOCs have a direct impact on health.
\nSeveral air quality standards (Cf OQAI: Observatoire de la Qualit\u00e9 de l’air Int\u00e9rieur) have in the past pointed the finger at indoor air pollution by VOCs from
\nfurniture glues, cleaning products, etc.
\nAlso, MyDATEC’s research has allowed us to correlate CO2 pollution (human presence) with VOC pollution, the VOC sensor being more reactive
\nthan the CO2 sensor. In fact, the presence of humans necessarily leads to VOC pollution in the air due to the presence of alcohols contained in cosmetic products and
\nperfumes.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div><\/div><\/div><\/div>Dual-zone option<\/h2><\/div><\/div><\/div><\/span><\/div><\/div><\/div>Explanation<\/h3><\/div>The insufflation network of the MyDATEC device is divided into two outlets. A first departure towards the insufflations of the Zone known as of Day and a second departure towards the insufflations of the Zone known as of Night.
\nThe operation of the BIZONE option is to concentrate a large part of the heating or cooling power of the MyDATEC unit on the zone in demand when only one of the two zones is in demand.
\nThe dual-flow damper allows a maximum flow rate of 60 m\u00b3\/h to pass through the insufflation branch on which it is mounted, if it is not activated (closed at rest). If it is activated (opened under voltage), the flow is no longer limited.
\nThe operation of the BIZONE is totally automatic, you don’t have to do anything to make it work. However, information is available on your
\n touch screen<\/strong>
\n<\/a> to show you how it works.<\/p>\n<\/div><\/div><\/div><\/div><\/div>Your remote control<\/h2><\/div><\/div><\/div>
- \n
- Touchscreen interface<\/li>\n
- Temperature sensor<\/li>\n
- Humidity sensor<\/li>\n
- Volatile Organic Compounds (VOC) sensor<\/li>\n<\/ul>\n<\/div>
Principles<\/h3><\/div>\n
\n\n\n
\n \n<\/th>\n DISPLAY<\/th>\n<\/tr>\n<\/thead>\n \n <\/td>\nOn \/ off<\/td>\n<\/tr>\n \n <\/td>\nHeating \/ Cooling<\/td>\n<\/tr>\n \n <\/td>\nEco \/ Boost<\/td>\n<\/tr>\n \n <\/td>\nHigh activation \/ deactivation
\ntimed extraction speed<\/td>\n<\/tr>\n\n <\/td>\nComfort temperature setting<\/td>\n<\/tr>\n \n <\/td>\nIndoor air quality control<\/td>\n<\/tr>\n \n <\/td>\nWeekly programming<\/td>\n<\/tr>\n \n <\/td>\nFilter clogging management<\/td>\n<\/tr>\n \n <\/td>\nConsumption<\/td>\n<\/tr>\n \n <\/td>\nSystem information<\/td>\n<\/tr>\n \n <\/td>\nProbe calibration<\/td>\n<\/tr>\n \n <\/td>\nInstaller settings
\n(under password)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nField of application<\/h3><\/div>
- \n
- Housing (new or renovation)<\/li>\n
- Tertiary<\/li>\n
- Replacement of old systems<\/li>\n<\/ul>\n<\/div>\n\n
\n\n
\n \nMarkets<\/th>\n Number of control points<\/th>\n Touch screen<\/th>\n Air quality sensor (*1)<\/th>\n Change over (*2)<\/th>\n<\/tr>\n<\/thead>\n \n Replacement<\/td>\n 1<\/td>\n 1<\/td>\n 0<\/td>\n No<\/td>\n<\/tr>\n \n Habitat<\/td>\n 2<\/td>\n 1<\/td>\n 1(T+%)<\/td>\n No<\/td>\n<\/tr>\n \n Habitat (VOC)<\/td>\n 2<\/td>\n 1<\/td>\n 2(T+%+COV)<\/td>\n No<\/td>\n<\/tr>\n \n Tertiary automatic<\/td>\n 2<\/td>\n 1<\/td>\n 1(T+%+COV)<\/td>\n Yes<\/td>\n<\/tr>\n \n Tertiary<\/td>\n 2<\/td>\n 1<\/td>\n 2(T+%+COV)<\/td>\n No<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n (*1) MyDATEC air quality sensors are available in two versions:<\/strong>
\nBase: T+%, Temperature sensor + Humidity sensor
\nVOC: T+%+VOC, Temperature sensor + Humidity sensor + VOC sensor<\/p>\n(*2) Change Over :<\/strong>
\nIt is a specific interface for the tertiary market allowing the automatic switch from heating to cooling mode and vice versa. The operator only needs to enter a heating and cooling setpoint temperature and the system automatically changes its operating mode depending on the room temperature.<\/p>\nIn the Tertiary versions :<\/strong>
\nThe touch screen can be in a remote location not accessible to users (e.g. closet or management room) as the temperature sensor is not used in these configurations. This allows, for example, in the case of a teaching room, that the regulation control is not accessible to the people who operate the place.<\/p>\n<\/div>Description<\/h3><\/div>\n
\n\n<\/thead>\n\n
\n <\/td>\n– Dimensions : W 60 mm \/ H 70 mm \/ D 23 mm
\n– Brushed stainless steel cover finish
\n– Power supply: 5 VDC from MyDATEC control unit
\n– Communication: MODBUS RS485
\n– Connection: 4 wires (2xAlim. + 2xModbus)
\n– Integrates perfectly into your environment, with flush or surface mounting<\/td>\n<\/tr>\n\n <\/td>\n– Dimensions : W85 mm \/ H85 mm \/ D20 mm
\n– Cream polypropylene frame
\n– 320 x 240 pixel color screen
\n– Resistive touch panel
\n– Power supply: 12V VDC from MyDATEC control unit
\n– Communication: Modbus RS485
\n– Connection: 4 wires (2xAlim. + 2xModbus)
\n– Fits perfectly into your environment<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\nSystem security<\/h3><\/div>
– High Pressure Protection
\n– Low pressure protection (leakage)
\n– Maximum blowing temperature
\n– Extracted air temperature too low
\n– Compressor start-up fault
\n– Temperature sensor fault<\/p>\n<\/div>Technical specifications<\/h3><\/div>
The control of your comfort and your indoor air quality<\/strong><\/p>\n
The MyDATEC system allows a heating (Winter mode – Heating) and cooling (Summer mode – Cooling) contribution. The system is controlled by one or two indoor temperature sensors allowing a management on a single zone or on two zones (Day Zone + Night Zone).
\nIn addition to this temperature comfort management, the MyDATEC air quality sensor has a humidity sensor and a Volatile Organic Compound (VOC) sensor, depending on the chosen configuration. This information on your indoor air quality allows you to regulate your air renewal rates in order to maintain a good quality of your indoor air through a more or less important fresh air renewal in your home.<\/p>\n<\/div><\/span><\/div>Comfort zone via temperature and humidity<\/p>\n<\/div>\n
\n\n<\/thead>\n\n
\n <\/td>\n
\nEvolution of VOC and CO2 levels in a meeting roomVOCs have a direct impact on health.
\nSeveral air quality standards (Cf OQAI: Observatoire de la Qualit\u00e9 de l’air Int\u00e9rieur) have in the past pointed the finger at indoor air pollution by VOCs from
\nfurniture glues, cleaning products, etc.
\nAlso, MyDATEC’s research has allowed us to correlate CO2 pollution (human presence) with VOC pollution, the VOC sensor being more reactive
\nthan the CO2 sensor. In fact, the presence of humans necessarily leads to VOC pollution in the air due to the presence of alcohols contained in cosmetic products and
\nperfumes.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div><\/div><\/div><\/div>Dual-zone option<\/h2><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div>Explanation<\/h3><\/div>
The insufflation network of the MyDATEC device is divided into two outlets. A first departure towards the insufflations of the Zone known as of Day and a second departure towards the insufflations of the Zone known as of Night.
\nThe operation of the BIZONE option is to concentrate a large part of the heating or cooling power of the MyDATEC unit on the zone in demand when only one of the two zones is in demand.
\nThe dual-flow damper allows a maximum flow rate of 60 m\u00b3\/h to pass through the insufflation branch on which it is mounted, if it is not activated (closed at rest). If it is activated (opened under voltage), the flow is no longer limited.
\nThe operation of the BIZONE is totally automatic, you don’t have to do anything to make it work. However, information is available on your
\n touch screen<\/strong>
\n<\/a> to show you how it works.<\/p>\n<\/div><\/div><\/div><\/div><\/div>Your remote control<\/h2><\/div><\/div><\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/pilotage-distance1.jpg\" "\\"pilotage-distance1\\"")
<\/span><\/div><\/div><\/div><\/div><\/div>![\"\"](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/distance-24072017-2.jpg\")
<\/div><\/div><\/div>![\"\"](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/application2-20072017.jpg\")
<\/div><\/div><\/div>![\"\"](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/04\/application3-20072017.jpg\")
<\/div><\/div><\/div><\/div>