PERSONALIZED STUDY AND LAYOUT<\/h1><\/div>After having concluded the feasibility and the financial aspect of your project, MyDATEC sets up the necessary means to schematize, dimension and constitute the components of your HVAC network<\/strong>. This requires a thorough examination supported by the expertise of a technical design office (BET) of your choice<\/strong>.<\/p>\n<\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2021\/12\/systeme-vmc.jpg\" "\\"systeme-vmc\\"")
<\/span><\/div><\/div><\/div><\/div><\/div>A STUDY BASED ON THE CONSTRAINTS OF YOUR BUILDING<\/h2>\n
MyDATEC ensures that the installation is perfectly adapted to the specificities of the building and its occupants<\/strong>.<\/p>\nIn the case of an old building,<\/strong> a preliminary renovation and rehabilitation phase may be suggested to ensure the performance of the new HVAC system.<\/p>\nWe also take into account the constraints of a CMV installation in
\n individual residential<\/strong>
\n<\/a> and an integration of a VMC network in tertiary<\/strong> <\/a>.<\/strong><\/p>\n<\/div>INSTALLATION OF AIR CONDITIONING IN INDIVIDUAL HOMES<\/h3><\/div>A thermodynamic double flow mechanical ventilation improves comfort in all seasons <\/strong>in individual houses and favors the renewal of the indoor air<\/strong>.<\/p>\nIn order to optimize the installation, it is necessary to determine the constraints<\/strong> within the home.<\/p>\n\n- THE QUALITY OF INSULATION AND SEALING OF THE DWELLING<\/em><\/li>\n<\/ul>\n
The better insulated and sealed the building is, the less heating power will be needed to heat it. The same goes for the refreshment. It is therefore essential to work on improving the building envelope first.<\/p>\n
In order to renew the air of this well insulated and well sealed building, a thermodynamic double flow ventilation system will be perfectly adapted. In just two hours, it renews the entire volume of the home.<\/p>\n
\n- INSTALLATION OF THE CENTRAL UNIT IN THE HEATED VOLUME<\/em><\/li>\n<\/ul>\n
The ideal location for the system is in the heated volume of the building. This way, the performance of the ventilation system will not be affected and access to the filters will be facilitated.<\/p>\n
Provide a condensate drain.<\/p>\n
\n- INTEGRATION OF AIR DUCTS AND ACCESSORIES<\/em><\/li>\n<\/ul>\n
The ventilation system is usually located in the attic or in the false ceiling of a house. To combine aesthetics and technique, ask us for advice, we will find the best compromise with you according to your constraints.<\/p>\n
\n- INSTALLATION AID DIAGRAM + ELECTRICAL DIAGRAM<\/em><\/li>\n<\/ul>\n
Whether you are a craftsman or a good do-it-yourselfer, a diagram to help you install is provided along with the electrical wiring diagram.<\/p>\n
\n- ASSISTANCE AND COMMISSIONING<\/em><\/li>\n<\/ul>\n
MyDATEC’s teams remain available by phone to resolve any doubts during the entire duration of your project and assist you during the commissioning of your system.<\/p>\n<\/div>
HVAC INSTALLATION IN COMMERCIAL BUILDINGS<\/h3><\/div>Just like the installation in individual residences, the installation of a double flow ventilation system
\n Double flow ventilation in tertiary sector<\/a>
\n<\/strong> (practice, nursery, professional offices) is subject to a careful study<\/strong><\/p>\nIndeed, taking into account the surface, the volume, the number of occupants and the type of construction, a reflection must be made before the launching of the building site<\/p>\n
Most often, an exchange between MyDATEC and the thermal and fluid design office is necessary.<\/p>\n<\/div>
A FACILITY THAT MEETS EXISTING CONSTRAINTS<\/h3><\/div>The constraints identified during the technical study will lead to all the actions to be implemented to optimize your ventilation system. The objective is mainly to ensure:<\/p>\n
\n- the watertightness of the network,<\/li>\n
- ease of maintenance,<\/li>\n
- acoustic comfort<\/li>\n
- insulation of ducts<\/li>\n<\/ul>\n
Once the constraints have been identified, MyDATEC will simulate the configuration of the HVAC network, size and draw up the plan of the future installation<\/strong>.<\/p>\n<\/div><\/div><\/div><\/div><\/div>SIZING AND LAYOUT OF THE AIRFLOW NETWORK<\/h2>\nNETWORK SIZING<\/h3>\n
We provide the VMC network kit<\/strong>.
\nAs for him, he will take care of the measurements, the dimensioning<\/strong> of each element (length of the conduits, dimension of the mouths, etc). This study also focuses on the passage of the ducts, the positioning of the vents, the location of the distributor and the central ventilation unit.<\/p>\n<\/div>STUDY OF THE SHORTEST AIR CIRCUIT<\/h3><\/div>He will also study the shortest circuit to minimize pressure <\/strong> and energy losses <\/strong> and thus maximize the performance of your
\n network.<\/strong>
\n<\/a><\/p>\n<\/div>LAYOUT OF THE VENTILATION NETWORK<\/h3><\/div>This study leads to the tracing of the plan of the aeraulic network highlighting the junctions and the changes of section<\/strong>. This plan should show a good balance between the supply and exhaust air network.<\/p>\n<\/div><\/div><\/div><\/div><\/div>CHOOSING THE RIGHT AIR CONDITIONING SOLUTION FOR YOUR NEEDS<\/h2>\n
MyDATEC offers the ideal double flow ventilation solution<\/strong> for your building.<\/p>\nIn this respect, our Smart V and Smart H ranges of CMVs<\/strong> have characteristics that meet the needs of individual buildings and commercial premises respectively.<\/p>\nThese two solutions present different extraction rates<\/strong> and we can thus refine the choice according to the volume of the building.<\/p>\n<\/div>THE COMPLEMENTS OF YOUR INSTALLATION VMC<\/h3><\/div>To complete your central ventilation unit Smart V<\/a> <\/strong>or
\n Smart H<\/a>
\n<\/strong>MyDATEC also supplies all the accessories and components of the airflow network. We guarantee the conformity of the installation to the RT standards, as well as its adequacy with the specificities of the building.<\/p>\n
After having concluded the feasibility and the financial aspect of your project, MyDATEC sets up the necessary means to schematize, dimension and constitute the components of your HVAC network<\/strong>. This requires a thorough examination supported by the expertise of a technical design office (BET) of your choice<\/strong>.<\/p>\n<\/div> MyDATEC ensures that the installation is perfectly adapted to the specificities of the building and its occupants<\/strong>.<\/p>\n In the case of an old building,<\/strong> a preliminary renovation and rehabilitation phase may be suggested to ensure the performance of the new HVAC system.<\/p>\n We also take into account the constraints of a CMV installation in A thermodynamic double flow mechanical ventilation improves comfort in all seasons <\/strong>in individual houses and favors the renewal of the indoor air<\/strong>.<\/p>\n In order to optimize the installation, it is necessary to determine the constraints<\/strong> within the home.<\/p>\n The better insulated and sealed the building is, the less heating power will be needed to heat it. The same goes for the refreshment. It is therefore essential to work on improving the building envelope first.<\/p>\n In order to renew the air of this well insulated and well sealed building, a thermodynamic double flow ventilation system will be perfectly adapted. In just two hours, it renews the entire volume of the home.<\/p>\n The ideal location for the system is in the heated volume of the building. This way, the performance of the ventilation system will not be affected and access to the filters will be facilitated.<\/p>\n Provide a condensate drain.<\/p>\n The ventilation system is usually located in the attic or in the false ceiling of a house. To combine aesthetics and technique, ask us for advice, we will find the best compromise with you according to your constraints.<\/p>\n Whether you are a craftsman or a good do-it-yourselfer, a diagram to help you install is provided along with the electrical wiring diagram.<\/p>\n MyDATEC’s teams remain available by phone to resolve any doubts during the entire duration of your project and assist you during the commissioning of your system.<\/p>\n<\/div> Just like the installation in individual residences, the installation of a double flow ventilation system Indeed, taking into account the surface, the volume, the number of occupants and the type of construction, a reflection must be made before the launching of the building site<\/p>\n Most often, an exchange between MyDATEC and the thermal and fluid design office is necessary.<\/p>\n<\/div> The constraints identified during the technical study will lead to all the actions to be implemented to optimize your ventilation system. The objective is mainly to ensure:<\/p>\n Once the constraints have been identified, MyDATEC will simulate the configuration of the HVAC network, size and draw up the plan of the future installation<\/strong>.<\/p>\n<\/div><\/div><\/div><\/div><\/div> We provide the VMC network kit<\/strong>. He will also study the shortest circuit to minimize pressure <\/strong> and energy losses <\/strong> and thus maximize the performance of your This study leads to the tracing of the plan of the aeraulic network highlighting the junctions and the changes of section<\/strong>. This plan should show a good balance between the supply and exhaust air network.<\/p>\n<\/div><\/div><\/div><\/div><\/div> MyDATEC offers the ideal double flow ventilation solution<\/strong> for your building.<\/p>\n In this respect, our Smart V and Smart H ranges of CMVs<\/strong> have characteristics that meet the needs of individual buildings and commercial premises respectively.<\/p>\n These two solutions present different extraction rates<\/strong> and we can thus refine the choice according to the volume of the building.<\/p>\n<\/div> To complete your central ventilation unit Smart V<\/a> <\/strong>or <\/span><\/div><\/div><\/div><\/div><\/div>A STUDY BASED ON THE CONSTRAINTS OF YOUR BUILDING<\/h2>\n
\n individual residential<\/strong>
\n<\/a> and an integration of a VMC network in tertiary<\/strong> <\/a>.<\/strong><\/p>\n<\/div>INSTALLATION OF AIR CONDITIONING IN INDIVIDUAL HOMES<\/h3><\/div>
\n
\n
\n
\n
\n
HVAC INSTALLATION IN COMMERCIAL BUILDINGS<\/h3><\/div>
\n Double flow ventilation in tertiary sector<\/a>
\n<\/strong> (practice, nursery, professional offices) is subject to a careful study<\/strong><\/p>\nA FACILITY THAT MEETS EXISTING CONSTRAINTS<\/h3><\/div>
\n
SIZING AND LAYOUT OF THE AIRFLOW NETWORK<\/h2>\n
NETWORK SIZING<\/h3>\n
\nAs for him, he will take care of the measurements, the dimensioning<\/strong> of each element (length of the conduits, dimension of the mouths, etc). This study also focuses on the passage of the ducts, the positioning of the vents, the location of the distributor and the central ventilation unit.<\/p>\n<\/div>STUDY OF THE SHORTEST AIR CIRCUIT<\/h3><\/div>
\n network.<\/strong>
\n<\/a><\/p>\n<\/div>LAYOUT OF THE VENTILATION NETWORK<\/h3><\/div>
CHOOSING THE RIGHT AIR CONDITIONING SOLUTION FOR YOUR NEEDS<\/h2>\n
THE COMPLEMENTS OF YOUR INSTALLATION VMC<\/h3><\/div>
\n Smart H<\/a>
\n<\/strong>MyDATEC also supplies all the accessories and components of the airflow network. We guarantee the conformity of the installation to the RT standards, as well as its adequacy with the specificities of the building.<\/p>\n
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2021\/12\/schema-config-elec.jpg\" "\\"schema-config-elec\\"")
<\/span><\/div><\/div><\/div><\/div><\/div><\/p>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":6,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"100-width.php","meta":{"footnotes":""},"class_list":["post-9027","page","type-page","status-publish","hentry"],"yoast_head":"\n