![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/07\/Pastilles-home-min-300x156.png\" "\\"Pastilles-home-min\\"")
<\/span><\/div>Indoor comfort in all seasons<\/h1><\/div>Heat, cool and sanitize your home<\/p>\n<\/div>
Contact and quote<\/span><\/a><\/div><\/div><\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/picto-chaud-froid-min-200x200.png\" "\\"picto-chaud-froid-min\\"")
<\/span><\/div>Heats and cools<\/p>\n
With one system, simply control<\/p>\n<\/div><\/div><\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/picto-air-min-200x200.png\" "\\"picto-air-min\\"")
<\/span><\/div>Clean and filtered air<\/p>\n
Efficient filtration, free of VOCs and pollutants<\/p>\n<\/div><\/div><\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/picto-ecologie-min-200x200.png\" "\\"picto-ecologie-min\\"")
<\/span><\/div>Energy saving<\/p>\n
Your energy consumption and costs decrease<\/p>\n<\/div><\/div><\/div><\/div><\/div>
Thermodynamic CMV: complete systems for optimal comfort!<\/h2><\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/home-mydatec-blog-energies-min-800x549.jpg\" "\\"home-mydatec-blog-energies-min\\"")
<\/span><\/div><\/div><\/div>The French manufacturer MyDATEC<\/a> offers a new generation of CMV that meets the new requirements of the thermal regulation, climate change and your indoor comfort.
\nThe thermodynamic double flow CMVs<\/a> are able to ventilate, purify, heat and cool your premises continuously and without you having to worry about it!<\/p>\n<\/div>\n- No more pollutants coming from the outside thanks to a powerful filtration<\/a> system.<\/li>\n
- Remove moisture and<\/strong> indoor pollutants<\/strong> by changing the indoor air more than once every two hours.<\/li>\n
- Use the energy <\/a>in the exhaust air before it leaves the building to make heat or cooling energy from the air entering your building.<\/li>\n
- Divide this energy into two zones, day\/night or ground floor\/floor.<\/li>\n
- Connect your thermodynamic CMV with a complementary system<\/a> to improve your comfort.<\/li>\n
- Control<\/strong> all these solutions remotely<\/strong>.<\/li>\n<\/ul>\n<\/div>To guide you in your choice, contact us! <\/span><\/a><\/div><\/div><\/div><\/div><\/div>
The advantages of the MyDATEC thermodynamic double flow ventilation system<\/h2><\/div>Ideally designed to improve your indoor comfort, the MyDATEC CMV solution combines a number of advantages.<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>1. A system capable of adapting to different types and sizes of buildings<\/span><\/a><\/h4><\/div>\nWith a coverage capacity of 200 m2, the MyDATEC system can renew the air in a dwelling and can be expanded to meet the ventilation needs of a larger area. Our solutions are particularly popular in medical practices, day care centers, schools and professional offices. MyDATEC is involved in the new and renovation of buildings.<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>2. An autonomous system and a simple and intuitive control<\/span><\/a><\/h4><\/div>\nThe system regulates itself according to the user’s desired temperature. These settings will allow the system to automatically change modes (heating, ventilation, over-ventilation, dehumidification, free cooling or active cooling).
\nThresholds for pollutants (VOCs) and humidity not to be exceeded can also be specified to the system. In addition, a fine programming can be configured to modulate the temperature requirements in the building according to 8 daily time slots and differentiate between weekdays and weekends.<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>3. In addition to ensuring healthy air in the building, the production of hot and cold air is clever and very energy efficient.<\/span><\/a><\/h4><\/div>\nBy recovering the energy from the stale air just before it is exhausted from the home, our system is able to :<\/p>\n
1. To increase the temperature of the fresh air flow entering the dwelling, approximately +27\u00b0C in heating mode (winter and mid-season).
\nExample:
\nIf 0\u00b0C outside, at the start of the machine the supply air to the living rooms (living room, bedrooms) will be 27\u00b0C
\nIf 10\u00b0C outside, the air blown in will be 37\u00b0C (excluding electrical resistances)<\/p>\n
2. To lower the temperature of the fresh air flow entering the dwelling, about -17\u00b0C in cooling mode (summer).
\nExample:
\nIf 37\u00b0C outside, the supply air will be about 20\u00b0C.<\/p>\n
To ensure this energy production, the system consumes the equivalent of a domestic refrigerator + freezer (with a consumption between 500W and 800W) according to the models of VMC and the sizes of the projects to equip).<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>4. A ready-to-install kit and easy installation<\/span><\/a><\/h4><\/div>\nMyDATEC provides an assembly guide for the parts that make up your thermodynamic CMV.
\nIt provides you with the guidelines to connect all the equipment, from the air components to the various connections.
\nMyDATEC makes an explanatory diagram on the plans of your project in order to facilitate the installation of all the components of the “aeraulic kit”. This set is made up of ducts, distribution boxes, control units, extraction and insufflation outlets, roof or wall outlets, clamps and other installation accessories.<\/p>\n
If necessary, a MyDATEC-approved installer can come to the site to install the device and put it into operation.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2021\/11\/maison-plaisance-touch-min-800x480.jpg\" "\\"maison-plaisance-touch-min\\"")
<\/span><\/div><\/div><\/div><\/div><\/div>MyDATEC thermodynamic double flow ventilation systems<\/h2><\/div>We make sure that each installation is adapted to the specificities and constraints of your buildings. Renovation, new construction, BBC or passive house, tertiary building (nursery, medical practice, offices etc.)<\/p>\n
Learn about our product lines<\/strong> that will provide your building with maximum energy efficiency.<\/p>\n<\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/07\/SMART-RTV_DETOURE-300x298.png\" "\\"SMART")
<\/span><\/div>SMART V vertical thermodynamic double flow ventilation system<\/p>\n<\/div>
The SMART V<\/strong> thermodynamic dual-flow CMV system combines all the functions to efficiently ventilate, cool, heat and dehumidify<\/strong> your rooms. The reversibility of the system allows the production of fresh air in your living rooms (living room, lounge, office and bedrooms) and thus guarantees your summer comfort.<\/p>\n<\/div>See the product<\/span><\/a><\/div><\/div><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/07\/image-300x249.jpg\" "\\"image\\"")
<\/span><\/div>SMART H horizontal thermodynamic double flow ventilation system<\/p>\n<\/div>
Smart H is a solution that is suitable for both installation and replacement of an existing machine<\/strong> often installed in the attic. Its characteristics are very well suited to tertiary buildings<\/strong>. It can be installed in the false ceiling. This is due to its low height of 50 cm and its layout which allows for the horizontal deployment of its ductwork thanks to its 4 modular outlets.<\/p>\n<\/div>See the product<\/span><\/a><\/div><\/div><\/div><\/i><\/i><\/span>How does the MyDATEC thermodynamic ventilation system work?<\/span><\/a><\/h4><\/div>\nAs a reversible device,<\/strong> the thermodynamic double flow CMV completes the heating and cooling needs by adjusting the thermal comfort according to the seasons.<\/p>\n\n- This ecological and economical concept<\/strong> is distinguished by its ability to purify indoor air and recover energy from stale air just before it leaves the building.<\/li>\n
- This air flow comes from all the wet rooms of the house<\/strong>: WC, bathroom, storeroom, laundry room and the kitchen. The extracted energy will be transferred and multiplied by the integrated heat pump to heat or cool the fresh air flow entering the building.<\/li>\n<\/ul>\n
In this way, the MyDATEC CMV offers a triple guarantee of better<\/strong> indoor air quality<\/strong>, optimized heating of your spaces and remarkable summer comfort. Depending on the volume and configuration of the building, an aeraulic study must be carried out before each project for an optimal and durable installation.<\/p>\n<\/div><\/div><\/div><\/i><\/i><\/span>Does the installation of a VMC require a preliminary study?<\/span><\/a><\/h4><\/div>\nYes. Based on the detailed plan of your building,
\n MyDATEC offers a personalized study<\/u>
\n<\/strong> with a complete diagram of the aeraulic distribution network, the extract units, the insufflation and recycling units, as well as the fresh air inlet and the stale air outlet towards the outside of the building.<\/p>\n<\/div><\/div><\/div><\/i><\/i><\/span>Why is it important to ventilate properly?<\/span><\/a><\/h4><\/div>\nThe more insulated and airtight the building, the more necessary it is to have a ventilation system capable of removing pollutants from the building.<\/p>\n
Indoor air pollutants are of 3 types:<\/p>\n
\n- The CO2 that we release through our breath, if present in too large a quantity, causes problems of concentration and sleep.<\/li>\n
- The water vapor, H2O, that we reject by breathing but also by the showers, the cooking vapors, the washing machine and the dryer, is responsible for the degradation of the building and favors the proliferation and the development of the bacteria inside the premises.<\/li>\n
- Volatile organic compounds, VOCs, are present in large quantities in household products, furniture, detergents, tobacco, etc. They are carcinogenic for our body<\/li>\n<\/ul>\n
It is therefore essential, and all the more so in a recent building, to expel these pollutants to the outside in an optimal and mechanical manner.<\/p>\n
The MyDATEC systems renew the indoor air more than conventional systems and control, thanks to sensors, the thresholds that should not be exceeded in the home. If the threshold is crossed, then the machine “over-ventilates”.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
What is the budget for a MyDATEC system? Contact us for more information! <\/span><\/a><\/div><\/div><\/div><\/div><\/div>ALL OUR PRODUCTS AROUND THE VMC<\/h2><\/div>
Heat, cool and sanitize your home<\/p>\n<\/div>
<\/span><\/div>Heats and cools<\/p>\n
With one system, simply control<\/p>\n<\/div><\/div><\/div>
<\/span><\/div>Clean and filtered air<\/p>\n
Efficient filtration, free of VOCs and pollutants<\/p>\n<\/div><\/div><\/div>
<\/span><\/div>Energy saving<\/p>\n
Your energy consumption and costs decrease<\/p>\n<\/div><\/div><\/div><\/div><\/div>
Thermodynamic CMV: complete systems for optimal comfort!<\/h2><\/div><\/div><\/div><\/span><\/div><\/div><\/div>The French manufacturer MyDATEC<\/a> offers a new generation of CMV that meets the new requirements of the thermal regulation, climate change and your indoor comfort.
\nThe thermodynamic double flow CMVs<\/a> are able to ventilate, purify, heat and cool your premises continuously and without you having to worry about it!<\/p>\n<\/div>\n- No more pollutants coming from the outside thanks to a powerful filtration<\/a> system.<\/li>\n
- Remove moisture and<\/strong> indoor pollutants<\/strong> by changing the indoor air more than once every two hours.<\/li>\n
- Use the energy <\/a>in the exhaust air before it leaves the building to make heat or cooling energy from the air entering your building.<\/li>\n
- Divide this energy into two zones, day\/night or ground floor\/floor.<\/li>\n
- Connect your thermodynamic CMV with a complementary system<\/a> to improve your comfort.<\/li>\n
- Control<\/strong> all these solutions remotely<\/strong>.<\/li>\n<\/ul>\n<\/div>To guide you in your choice, contact us! <\/span><\/a><\/div><\/div><\/div><\/div><\/div>
The advantages of the MyDATEC thermodynamic double flow ventilation system<\/h2><\/div>Ideally designed to improve your indoor comfort, the MyDATEC CMV solution combines a number of advantages.<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>1. A system capable of adapting to different types and sizes of buildings<\/span><\/a><\/h4><\/div>\nWith a coverage capacity of 200 m2, the MyDATEC system can renew the air in a dwelling and can be expanded to meet the ventilation needs of a larger area. Our solutions are particularly popular in medical practices, day care centers, schools and professional offices. MyDATEC is involved in the new and renovation of buildings.<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>2. An autonomous system and a simple and intuitive control<\/span><\/a><\/h4><\/div>\nThe system regulates itself according to the user’s desired temperature. These settings will allow the system to automatically change modes (heating, ventilation, over-ventilation, dehumidification, free cooling or active cooling).
\nThresholds for pollutants (VOCs) and humidity not to be exceeded can also be specified to the system. In addition, a fine programming can be configured to modulate the temperature requirements in the building according to 8 daily time slots and differentiate between weekdays and weekends.<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>3. In addition to ensuring healthy air in the building, the production of hot and cold air is clever and very energy efficient.<\/span><\/a><\/h4><\/div>\nBy recovering the energy from the stale air just before it is exhausted from the home, our system is able to :<\/p>\n
1. To increase the temperature of the fresh air flow entering the dwelling, approximately +27\u00b0C in heating mode (winter and mid-season).
\nExample:
\nIf 0\u00b0C outside, at the start of the machine the supply air to the living rooms (living room, bedrooms) will be 27\u00b0C
\nIf 10\u00b0C outside, the air blown in will be 37\u00b0C (excluding electrical resistances)<\/p>\n
2. To lower the temperature of the fresh air flow entering the dwelling, about -17\u00b0C in cooling mode (summer).
\nExample:
\nIf 37\u00b0C outside, the supply air will be about 20\u00b0C.<\/p>\n
To ensure this energy production, the system consumes the equivalent of a domestic refrigerator + freezer (with a consumption between 500W and 800W) according to the models of VMC and the sizes of the projects to equip).<\/p>\n<\/div><\/div><\/div>
<\/i><\/i><\/span>4. A ready-to-install kit and easy installation<\/span><\/a><\/h4><\/div>\nMyDATEC provides an assembly guide for the parts that make up your thermodynamic CMV.
\nIt provides you with the guidelines to connect all the equipment, from the air components to the various connections.
\nMyDATEC makes an explanatory diagram on the plans of your project in order to facilitate the installation of all the components of the “aeraulic kit”. This set is made up of ducts, distribution boxes, control units, extraction and insufflation outlets, roof or wall outlets, clamps and other installation accessories.<\/p>\n
If necessary, a MyDATEC-approved installer can come to the site to install the device and put it into operation.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div>
<\/span><\/div><\/div><\/div><\/div><\/div>MyDATEC thermodynamic double flow ventilation systems<\/h2><\/div>We make sure that each installation is adapted to the specificities and constraints of your buildings. Renovation, new construction, BBC or passive house, tertiary building (nursery, medical practice, offices etc.)<\/p>\n
Learn about our product lines<\/strong> that will provide your building with maximum energy efficiency.<\/p>\n<\/div><\/div><\/div><\/span><\/div>SMART V vertical thermodynamic double flow ventilation system<\/p>\n<\/div>
The SMART V<\/strong> thermodynamic dual-flow CMV system combines all the functions to efficiently ventilate, cool, heat and dehumidify<\/strong> your rooms. The reversibility of the system allows the production of fresh air in your living rooms (living room, lounge, office and bedrooms) and thus guarantees your summer comfort.<\/p>\n<\/div>See the product<\/span><\/a><\/div><\/div><\/div><\/span><\/div>SMART H horizontal thermodynamic double flow ventilation system<\/p>\n<\/div>
Smart H is a solution that is suitable for both installation and replacement of an existing machine<\/strong> often installed in the attic. Its characteristics are very well suited to tertiary buildings<\/strong>. It can be installed in the false ceiling. This is due to its low height of 50 cm and its layout which allows for the horizontal deployment of its ductwork thanks to its 4 modular outlets.<\/p>\n<\/div>See the product<\/span><\/a><\/div><\/div><\/div><\/i><\/i><\/span>How does the MyDATEC thermodynamic ventilation system work?<\/span><\/a><\/h4><\/div>\nAs a reversible device,<\/strong> the thermodynamic double flow CMV completes the heating and cooling needs by adjusting the thermal comfort according to the seasons.<\/p>\n\n- This ecological and economical concept<\/strong> is distinguished by its ability to purify indoor air and recover energy from stale air just before it leaves the building.<\/li>\n
- This air flow comes from all the wet rooms of the house<\/strong>: WC, bathroom, storeroom, laundry room and the kitchen. The extracted energy will be transferred and multiplied by the integrated heat pump to heat or cool the fresh air flow entering the building.<\/li>\n<\/ul>\n
In this way, the MyDATEC CMV offers a triple guarantee of better<\/strong> indoor air quality<\/strong>, optimized heating of your spaces and remarkable summer comfort. Depending on the volume and configuration of the building, an aeraulic study must be carried out before each project for an optimal and durable installation.<\/p>\n<\/div><\/div><\/div><\/i><\/i><\/span>Does the installation of a VMC require a preliminary study?<\/span><\/a><\/h4><\/div>\nYes. Based on the detailed plan of your building,
\n MyDATEC offers a personalized study<\/u>
\n<\/strong> with a complete diagram of the aeraulic distribution network, the extract units, the insufflation and recycling units, as well as the fresh air inlet and the stale air outlet towards the outside of the building.<\/p>\n<\/div><\/div><\/div><\/i><\/i><\/span>Why is it important to ventilate properly?<\/span><\/a><\/h4><\/div>\nThe more insulated and airtight the building, the more necessary it is to have a ventilation system capable of removing pollutants from the building.<\/p>\n
Indoor air pollutants are of 3 types:<\/p>\n
\n- The CO2 that we release through our breath, if present in too large a quantity, causes problems of concentration and sleep.<\/li>\n
- The water vapor, H2O, that we reject by breathing but also by the showers, the cooking vapors, the washing machine and the dryer, is responsible for the degradation of the building and favors the proliferation and the development of the bacteria inside the premises.<\/li>\n
- Volatile organic compounds, VOCs, are present in large quantities in household products, furniture, detergents, tobacco, etc. They are carcinogenic for our body<\/li>\n<\/ul>\n
It is therefore essential, and all the more so in a recent building, to expel these pollutants to the outside in an optimal and mechanical manner.<\/p>\n
The MyDATEC systems renew the indoor air more than conventional systems and control, thanks to sensors, the thresholds that should not be exceeded in the home. If the threshold is crossed, then the machine “over-ventilates”.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
What is the budget for a MyDATEC system? Contact us for more information! <\/span><\/a><\/div><\/div><\/div><\/div><\/div>ALL OUR PRODUCTS AROUND THE VMC<\/h2><\/div>
<\/span><\/div><\/div><\/div>The French manufacturer MyDATEC<\/a> offers a new generation of CMV that meets the new requirements of the thermal regulation, climate change and your indoor comfort. Ideally designed to improve your indoor comfort, the MyDATEC CMV solution combines a number of advantages.<\/p>\n<\/div><\/div><\/div> With a coverage capacity of 200 m2, the MyDATEC system can renew the air in a dwelling and can be expanded to meet the ventilation needs of a larger area. Our solutions are particularly popular in medical practices, day care centers, schools and professional offices. MyDATEC is involved in the new and renovation of buildings.<\/p>\n<\/div><\/div><\/div> The system regulates itself according to the user’s desired temperature. These settings will allow the system to automatically change modes (heating, ventilation, over-ventilation, dehumidification, free cooling or active cooling). By recovering the energy from the stale air just before it is exhausted from the home, our system is able to :<\/p>\n 1. To increase the temperature of the fresh air flow entering the dwelling, approximately +27\u00b0C in heating mode (winter and mid-season). 2. To lower the temperature of the fresh air flow entering the dwelling, about -17\u00b0C in cooling mode (summer). To ensure this energy production, the system consumes the equivalent of a domestic refrigerator + freezer (with a consumption between 500W and 800W) according to the models of VMC and the sizes of the projects to equip).<\/p>\n<\/div><\/div><\/div> MyDATEC provides an assembly guide for the parts that make up your thermodynamic CMV. If necessary, a MyDATEC-approved installer can come to the site to install the device and put it into operation.<\/p>\n<\/div><\/div><\/div><\/div><\/div><\/div><\/div> We make sure that each installation is adapted to the specificities and constraints of your buildings. Renovation, new construction, BBC or passive house, tertiary building (nursery, medical practice, offices etc.)<\/p>\n Learn about our product lines<\/strong> that will provide your building with maximum energy efficiency.<\/p>\n<\/div><\/div><\/div> SMART V vertical thermodynamic double flow ventilation system<\/p>\n<\/div> The SMART V<\/strong> thermodynamic dual-flow CMV system combines all the functions to efficiently ventilate, cool, heat and dehumidify<\/strong> your rooms. The reversibility of the system allows the production of fresh air in your living rooms (living room, lounge, office and bedrooms) and thus guarantees your summer comfort.<\/p>\n<\/div> SMART H horizontal thermodynamic double flow ventilation system<\/p>\n<\/div> Smart H is a solution that is suitable for both installation and replacement of an existing machine<\/strong> often installed in the attic. Its characteristics are very well suited to tertiary buildings<\/strong>. It can be installed in the false ceiling. This is due to its low height of 50 cm and its layout which allows for the horizontal deployment of its ductwork thanks to its 4 modular outlets.<\/p>\n<\/div> As a reversible device,<\/strong> the thermodynamic double flow CMV completes the heating and cooling needs by adjusting the thermal comfort according to the seasons.<\/p>\n In this way, the MyDATEC CMV offers a triple guarantee of better<\/strong> indoor air quality<\/strong>, optimized heating of your spaces and remarkable summer comfort. Depending on the volume and configuration of the building, an aeraulic study must be carried out before each project for an optimal and durable installation.<\/p>\n<\/div><\/div><\/div> Yes. Based on the detailed plan of your building, The more insulated and airtight the building, the more necessary it is to have a ventilation system capable of removing pollutants from the building.<\/p>\n Indoor air pollutants are of 3 types:<\/p>\n It is therefore essential, and all the more so in a recent building, to expel these pollutants to the outside in an optimal and mechanical manner.<\/p>\n The MyDATEC systems renew the indoor air more than conventional systems and control, thanks to sensors, the thresholds that should not be exceeded in the home. If the threshold is crossed, then the machine “over-ventilates”.<\/p>\n<\/div><\/div><\/div><\/div><\/div>
\nThe thermodynamic double flow CMVs<\/a> are able to ventilate, purify, heat and cool your premises continuously and without you having to worry about it!<\/p>\n<\/div>\n
The advantages of the MyDATEC thermodynamic double flow ventilation system<\/h2><\/div>
<\/i><\/i><\/span>1. A system capable of adapting to different types and sizes of buildings<\/span><\/a><\/h4><\/div>
<\/i><\/i><\/span>2. An autonomous system and a simple and intuitive control<\/span><\/a><\/h4><\/div>
\nThresholds for pollutants (VOCs) and humidity not to be exceeded can also be specified to the system. In addition, a fine programming can be configured to modulate the temperature requirements in the building according to 8 daily time slots and differentiate between weekdays and weekends.<\/p>\n<\/div><\/div><\/div><\/i><\/i><\/span>3. In addition to ensuring healthy air in the building, the production of hot and cold air is clever and very energy efficient.<\/span><\/a><\/h4><\/div>
\nExample:
\nIf 0\u00b0C outside, at the start of the machine the supply air to the living rooms (living room, bedrooms) will be 27\u00b0C
\nIf 10\u00b0C outside, the air blown in will be 37\u00b0C (excluding electrical resistances)<\/p>\n
\nExample:
\nIf 37\u00b0C outside, the supply air will be about 20\u00b0C.<\/p>\n<\/i><\/i><\/span>4. A ready-to-install kit and easy installation<\/span><\/a><\/h4><\/div>
\nIt provides you with the guidelines to connect all the equipment, from the air components to the various connections.
\nMyDATEC makes an explanatory diagram on the plans of your project in order to facilitate the installation of all the components of the “aeraulic kit”. This set is made up of ducts, distribution boxes, control units, extraction and insufflation outlets, roof or wall outlets, clamps and other installation accessories.<\/p>\n<\/span><\/div><\/div><\/div><\/div><\/div>MyDATEC thermodynamic double flow ventilation systems<\/h2><\/div>
<\/span><\/div><\/span><\/div><\/i><\/i><\/span>How does the MyDATEC thermodynamic ventilation system work?<\/span><\/a><\/h4><\/div>
\n
<\/i><\/i><\/span>Does the installation of a VMC require a preliminary study?<\/span><\/a><\/h4><\/div>
\n MyDATEC offers a personalized study<\/u>
\n<\/strong> with a complete diagram of the aeraulic distribution network, the extract units, the insufflation and recycling units, as well as the fresh air inlet and the stale air outlet towards the outside of the building.<\/p>\n<\/div><\/div><\/div><\/i><\/i><\/span>Why is it important to ventilate properly?<\/span><\/a><\/h4><\/div>
\n
ALL OUR PRODUCTS AROUND THE VMC<\/h2><\/div>
![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/produit-vmc-double-flux-min-600x600.jpg\" "\\"produit-vmc-double-flux-min\\"")
<\/span><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/produit-puit-hydraulique-min-600x600.jpg\" "\\"produit-puit-hydraulique-min\\"")
<\/span><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/produit-ballon-ecs-min-600x599.jpg\" "\\"produit-ballon-ecs-min\\"")
<\/span><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/produit-poele-granule-min.jpg\" "\\"produit-poele-granule-min\\"")
<\/span><\/div>![](\"https:\/\/www.mydatec.com\/wp-content\/uploads\/2022\/01\/produit-poele-bois-min-600x599.jpg\" "\\"produit-poele-bois-min\\"")
<\/span><\/div>