Smart + V

VMC double flux

SMART + V

Heat up, ventilate, cool down … with optimal comfort.

Smart+ V is a double-flow CMV system combining static and thermodynamic energy recovery at the same time.

BENEFITS

  • Combination of thermodynamic and static double flow
  • Active or free cooling
  • Hot air redistribution (wood stoves…)
  • Air quality (Filtering) / Reactive system

COMPLIANCE

  • Title V MyDATEC / Label RT2012 -20%
  • Static exchanger certified by Terra Environnement

Application

  • For Houses – New, RT2012 and passive

Set-up

  • In an insulated plant room
  • Condensation discharge
  • Insulated air supply pipes (min. 25mm)
  • Insulated extraction pipes (min. 25mm)
  • Insulated pipes for release / fresh air 25mm or 50mm
  • Electricity: power supply 230V – 50Hz (2.5mm²)
  • Connection: 4 cables 0.5mm² max.

Description

  • Automatic set-up
  • Compact single block without external units
  • White pre-lacquered aluminium finish 20/10
  • Heat and sound insulation
  • High-performance counter current static exchanger without VOC, French
  • Heat pump on exhaust air, built-in
  • Rotary compressor, French
  • Low-consumption fans (EC ERP 2015)
  • Adjustable ventilation output
  • Device pre-loaded with R407C gas
  • Maintenance at the front

Size (mm)

smart-plus-v-size

 

Range

DESIGNATION DESCRIPTION
MyDATEC Smart+ 200V unit KIT Static and thermodynamic double flow CMV
Heating 5kW (of which 3.2kW for the upper heater)
Cooling 1.75kW (free cooling or active)
Hot air distribution (burner, mezzanine)
Pilotage tactile
MyDATEC Smart+ 300V unit KIT Available during the 3rd quarter of 2017

Options

NAME
DESCRIPTION
Dual zone bizone Management independent of the living area
and the night area (ideal for houses larger than 160m²)
Crossing of the ceiling samrt-v-traverse-plafond Aesthetically pleasing duct connection and seal for crossing
the ceiling
Duct cover cache-gaine Telescopic panels (adjustable based on the height of your ceiling)
that hide the ducts in a pleasant-looking way

Technical features

Smart + 200 Smart + 300
COP (+7°C ext. / -7°C ext.)
with 20°C inside

3,27 / 4,14

Available in 2017
Heating power supplied at -7°C ext.
/ 20°C int.

1,8kW

Heating pump standard
power absorption at +7°C ext. / 20°C int.

0,56 kW

EER at 35°C ext. / 27°C int.

2,16

Heating pump cooling
power supplied at 35°C ext. / 27°C int

1,75 kW

Nominal air flow to be considered
for thermal calculations

200 m3/h

Maximum air flow configurable
(200 Pa)

300 m3/h

Average intensity absorbed

2,3A

Maximum power
of additional heaters

3,2 kW

Power supply

230 V – 50 Hz

Recommended protection

10 A courbe D

Filtering

G4

Refrigerant fluid

R 407 C

Mass of refrigerant fluid

900 g

Unit weight

92 Kg

smart-plus-v-caracteristiques1-en

 

smart-plus-v-caracteristiques2-en

smart-plus-fans